Typical assembly (not a tested listing)
1-1/2 Hour Fire Rated Steel Truss Roof/Ceiling — single layer 5/8" Type X gypsum board
Typical 1.5-hour fire-rated steel truss roof/ceiling assembly. Steel bar joists at 48" o.c. with Rigid insulation board, single layer of 5/8" Type X gypsum board on furring channels ceiling, 22 ga. steel deck. Illustrative example of typical construction — not a tested UL or GA listing. Use a listed design (UL Product iQ or GA-600) for construction documents.
Steel bar joists at 48" o.c. with Rigid insulation board, single layer of 5/8" Type X gypsum board on furring channels ceiling, 22 ga. steel deck
The rest of 1-1/2 Hour Fire Rated Steel Truss Roof/Ceiling — single l… is for members
You're reading the opening of 1-1/2 Hour Fire Rated Steel Truss Roof/Ceiling — single l…. Members see the complete text, every cross-reference and the tools on this page — free for 14 days, no card required.
- Layer-by-layer components with thicknesses
- Cross-section diagram
- Applicable code sections and test standard
- 6 related assemblies