Typical assembly (not a tested listing)

1-Hour Fire Rated Wood Stud Wall — single layer 1/2" Type X on resilient channels

Typical 1-hour fire-rated wood stud wall assembly. 2x4 wood studs at 16" o.c. with R-13 fiberglass batt, single layer of 1/2" Type X gypsum board each side on resilient channels. Illustrative example of typical construction — not a tested UL or GA listing. Use a listed design (UL Product iQ or GA-600) for construction documents.

2x4 wood studs at 16" o.c. with R-13 fiberglass batt, single layer of 1/2" Type X gypsum board each side on resilient channels

The rest of 1-Hour Fire Rated Wood Stud Wall — single layer 1/2" Type… is for members

You're reading the opening of 1-Hour Fire Rated Wood Stud Wall — single layer 1/2" Type…. Members see the complete text, every cross-reference and the tools on this page — free for 14 days, no card required.

  • Layer-by-layer components with thicknesses
  • Cross-section diagram
  • Applicable code sections and test standard
  • 6 related assemblies
Unlock 1-Hour Fire Rated Wood Stud Wall — single layer 1/2" Type… — free for 14 daysSign in →