Typical assembly (not a tested listing)
1-1/2 Hour Fire Rated Shaft Wall — single layer 1" Type C
Typical 1.5-hour fire-rated shaft wall assembly. 3-5/8" CT studs at 24" o.c. with R-8 mineral wool, single layer of 1" Shaftliner gypsum board each side. Illustrative example of typical construction — not a tested UL or GA listing. Use a listed design (UL Product iQ or GA-600) for construction documents.
3-5/8" CT studs at 24" o.c. with R-8 mineral wool, single layer of 1" Shaftliner gypsum board each side
The rest of 1-1/2 Hour Fire Rated Shaft Wall — single layer 1" Type C is for members
You're reading the opening of 1-1/2 Hour Fire Rated Shaft Wall — single layer 1" Type C. Members see the complete text, every cross-reference and the tools on this page — free for 14 days, no card required.
- Layer-by-layer components with thicknesses
- Cross-section diagram
- Applicable code sections and test standard
- 6 related assemblies