Typical assembly (not a tested listing)
3-Hour Fire Rated Shaft Wall — 3 layers 5/8" Type X on resilient channels
Typical 3-hour fire-rated shaft wall assembly. 3-5/8" CT studs at 24" o.c. with R-11 fiberglass batt, 3 layers of 5/8" Type X gypsum board each side on resilient channels. Illustrative example of typical construction — not a tested UL or GA listing. Use a listed design (UL Product iQ or GA-600) for construction documents.
3-5/8" CT studs at 24" o.c. with R-11 fiberglass batt, 3 layers of 5/8" Type X gypsum board each side on resilient channels
The rest of 3-Hour Fire Rated Shaft Wall — 3 layers 5/8" Type X on re… is for members
You're reading the opening of 3-Hour Fire Rated Shaft Wall — 3 layers 5/8" Type X on re…. Members see the complete text, every cross-reference and the tools on this page — free for 14 days, no card required.
- Layer-by-layer components with thicknesses
- Cross-section diagram
- Applicable code sections and test standard
- 6 related assemblies