Typical assembly (not a tested listing)
4-Hour Fire Rated Shaft Wall — 4 layers 1" Type C on resilient channels
Typical 4-hour fire-rated shaft wall assembly. 3-5/8" CT studs at 24" o.c., 4 layers of 1" Shaftliner gypsum board each side on resilient channels. Illustrative example of typical construction — not a tested UL or GA listing. Use a listed design (UL Product iQ or GA-600) for construction documents.
3-5/8" CT studs at 24" o.c., 4 layers of 1" Shaftliner gypsum board each side on resilient channels
The rest of 4-Hour Fire Rated Shaft Wall — 4 layers 1" Type C on resi… is for members
You're reading the opening of 4-Hour Fire Rated Shaft Wall — 4 layers 1" Type C on resi…. Members see the complete text, every cross-reference and the tools on this page — free for 14 days, no card required.
- Layer-by-layer components with thicknesses
- Cross-section diagram
- Applicable code sections and test standard
- 6 related assemblies