FHWA FP-24
Section 708 — Plastic Pipe
FP-24 · Division 700 — Material. Full current text with cross-references on BuildSpec.
Section 708. — PLASTIC PIPE 708.01 Smooth Wall Polyethylene Pipe. (a) General use. Provide perforated and nonperforated 12 - to 42- inch diameter pipe conformin g to ASTM F714 and minimum cell Class PE335434C according to ASTM D3350. (b) Water systems (4 inches and over). Provide pipe conforming to the requirements of ANSI/AWWA C906. Fabricate from high- density polyethylene PE3408 conforming to a minimum cell Class 34 5464 C, D or E according to ASTM D3350. 708.02 Corrugated Polyethylene Pipe. (a) General use. Provide perforated and nonperforated 12 - to 48- inch diameter pipe conforming to…
The rest of Section 708 — Plastic Pipe is for members
You're reading the opening of Section 708 — Plastic Pipe. Members see the complete text, every cross-reference and the tools on this page — free for 14 days, no card required.
- Full text of every FP-24 section
- Search across all federal and state standards in one place
- Related sections, figures and tables
- Ask Copilot about this section, with citations