MUTCD 11th Edition (2023)
Section 2E.24 — Interchange Sequence Signs (E9-1 and E9-2)
Manual on Uniform Traffic Control Devices, Section 2E.24. Standards, guidance, options and support statements, with figures and cross-references.
Section 2E.24 Interchange Sequence Signs (E9-1 and E9-2) Support: 01 Interchanges are sometimes closely spaced, particularly through large urban areas, so that typical guide signs cannot be adequately spaced. In such cases, Interchange Sequence signs identifying the next two (E9-1) or three (E9-2) interchanges (see Figure 2E-10) can provide the necessary exit destination guidance. Guidance: 02 Where there is less than 800 feet between the theoretical gores of successive interchange entrance or exit ramps, Interchange Sequence signs should be used instead of Interchange Advance guide signs for…
The full text is for BuildSpec members
Read the complete section, search across every adopted code, run the calculators and ask Copilot — free for 14 days, no card required.
- Full section text with Standard / Guidance / Option / Support labels
- Figures and tables referenced by this section
- Search across the whole MUTCD and every federal standard
- Ask Copilot about this section, with citations