MUTCD 11th Edition (2023)
Section 2E.55 — Route Signs and Trailblazer Assemblies
Manual on Uniform Traffic Control Devices, Section 2E.55. Standards, guidance, options and support statements, with figures and cross-references.
Section 2E.55 Route Signs and Trailblazer Assemblies Guidance: 01 Route signs (see Figure 2E-60 ) should be incorporated as cut-out shields or other distinctive shapes on large directional guide signs. Where the Interstate shield is displayed in an assembly or on the face of a guide sign with U.S. or State Route signs, the Interstate numeral should be at least equal in size to the numerals on the other Route signs. The use of independent Route signs should be limited primarily to route confirmation assemblies.Figure 2E-57. Example of a Next Exits Sign E9-3 Sect. 2E.55Figure 2E-58. Example of…
The full text is for BuildSpec members
Read the complete section, search across every adopted code, run the calculators and ask Copilot — free for 14 days, no card required.
- Full section text with Standard / Guidance / Option / Support labels
- Figures and tables referenced by this section
- Search across the whole MUTCD and every federal standard
- Ask Copilot about this section, with citations