MUTCD 11th Edition (2023)
Section 6G.08 — Work Zone and Higher Fines Signs and Plaques
Manual on Uniform Traffic Control Devices, Section 6G.08. Standards, guidance, options and support statements, with figures and cross-references.
Section 6G.08 Work Zone and Higher Fines Signs and Plaques Option: 01 A WORK ZONE (G20-5aP) plaque (see Figure 6G-1) may be mounted above a Speed Limit sign to emphasize that a reduced speed limit is in effect within a TTC zone. An END WORK ZONE SPEED LIMIT (R2-12) sign (see Figure 6G-1) may be installed at the downstream end of the reduced speed limit zone. Guidance: 02 A BEGIN HIGHER FINES ZONE (R2-10) sign (see Figure 6G-1 ) should be installed at or near the beginning of a TTC zone where increased fines are imposed for traffic violations, and an END HIGHER FINES ZONE (R2-11) sign (see…
The full text is for BuildSpec members
Read the complete section, search across every adopted code, run the calculators and ask Copilot — free for 14 days, no card required.
- Full section text with Standard / Guidance / Option / Support labels
- Figures and tables referenced by this section
- Search across the whole MUTCD and every federal standard
- Ask Copilot about this section, with citations