29 CFR Part 1926
§ 1926.555 — Conveyors
OSHA 1926 · Subpart N — Helicopters, Hoists, Elevators, and Conveyors. Full current text with cross-references on BuildSpec.
§ 1926.555 Conveyors. (a) General requirements. (1) Means for stopping the motor or engine shall be provided at the operator's station. Conveyor systems shall be equipped with an audible warning signal to be sounded immediately before starting up the conveyor. (2) If the operator's station is at a remote point, similar provisions for stopping the motor or engine shall be provided at the motor or engine location. (3) Emergency stop switches shall be arranged so that the conveyor cannot be started again until the actuating stop switch has been reset to running or “on” position. (4) Screw…
The rest of § 1926.555 — Conveyors is for members
You're reading the opening of § 1926.555 — Conveyors. Members see the complete text, every cross-reference and the tools on this page — free for 14 days, no card required.
- Full text of every OSHA 1926 section
- Search across all federal and state standards in one place
- Related sections, figures and tables
- Ask Copilot about this section, with citations