29 CFR Part 1926
§ 1926.751 — Definitions
OSHA 1926 · Subpart R — Steel Erection. Full current text with cross-references on BuildSpec.
§ 1926.751 Definitions. Anchored bridging means that the steel joist bridging is connected to a bridging terminus point. Bolted diagonal bridging means diagonal bridging that is bolted to a steel joist or joists. Bridging clip means a device that is attached to the steel joist to allow the bolting of the bridging to the steel joist. Bridging terminus point means a wall, a beam, tandem joists (with all bridging installed and a horizontal truss in the plane of the top chord) or other element at an end or intermediate point(s) of a line of bridging that provides an anchor point for the steel…
The full text is for BuildSpec members
Read the complete section, search across every adopted code, run the calculators and ask Copilot — free for 14 days, no card required.
- Full text of every OSHA 1926 section
- Search across all federal and state standards in one place
- Related sections, figures and tables
- Ask Copilot about this section, with citations