IBC 2021 · Model
Chapter 26: Plastic
37 sections in this chapter of the IBC 2021 model text — not Model's amended edition.
2601.1 Scope These provisions shall govern the materials, design, application, construction and installation of foam plastic, foam plastic insulation, plastic veneer, interior plastic finish and trim, light-transmitting plastics and plastic composites, including plastic lumber.
- 2601.1Scope
- 2602.1Exterior wall covering and architectural trim
- 2602.2Interior finish and trim
- 2603.1General
- 2603.1.1Spray-applied foam plastic
- 2603.2Labeling and identification
- 2603.3Surface-burning characteristics
- 2603.4Thermal barrier
- 2603.4.1Thermal barrier not required
- 2603.5Exterior walls of buildings of any height
- 2603.6Roofing
- 2603.7Foam plastic in plenums as interior finish or interior trim
- 2603.8Protection against termites
- 2603.9Special approval
- 2604.1General
- 2604.1.1Plenums
- 2604.2Interior trim
- 2605.1Interior use
- 2605.2Exterior use
- 2606.1General
- 2606.2Approval for use
- 2606.4Specifications
- 2606.7Light-diffusing systems
- 2607.1General
- 2607.2Installation
- 2608.1Buildings of Type VB construction
- 2608.2Buildings of other types of construction
- 2609.1General
- 2609.2Separation
- 2610.1Light-transmitting plastic glazing of skylight assemblies
- 2610.2Mounting
- 2611.1General
- 2611.2Maximum area
- 2612.1General
- 2612.2Labeling
- 2613.1General
- 2613.2Labeling and identification
The rest of Chapter 26: Plastic is for members
You're reading the opening of Chapter 26: Plastic. Members see the complete text, every cross-reference and the tools on this page — free for 14 days, no card required.
- Full text of every section in this chapter
- Plain-English summaries and cross-references
- Compare this chapter across jurisdictions
- Ask Code AI about any section, with citations
Our previews are real data — live counts, no placeholders. We publish our error log →