IPC 2021 · Model

Chapter 9: Vents

47 sections in this chapter of the IPC 2021 model text — not Model's amended edition.

1. 901.1Scope
2. 901.2Trap seal protection
3. 901.2.1Venting required
4. 901.3Chemical waste vent systems
5. 901.4Use limitations
6. 901.5Tests
7. 902.1Vents
8. 902.2Sheet copper
9. 902.3Sheet lead
10. 903.1Vent terminal required
11. 903.1.1Roof extension unprotected
12. 903.1.2Roof used for recreational or assembly purposes
13. 903.2Frost closure
14. 903.3Flashings
15. 903.4Prohibited use
16. 903.5Location of vent terminal
17. 904.1Required vent extension
18. 904.1.1Installation
19. 904.2Vent stack required
20. 904.3Vent termination
21. 904.4Vent connection at base
22. 905.1Connection
23. 905.2Grade
24. 906.1Size of stack vents and vent stacks
25. 906.2Vents other than stack vents or vent stacks
26. 907.1Vent for horizontal offset of drainage stack
27. 907.2Upper section
28. 908.1Where required
29. 908.2Size and connection
30. 909.1Distance of trap from vent
31. 909.2Venting of fixture drains
32. 910.1Individual vent permitted
33. 911.1Individual vent as common vent
34. 911.2Connection at the same level
35. 912.1Horizontal wet vent permitted
36. 912.1.1Vertical wet vent permitted
37. 913.1Waste stack vent permitted
38. 913.2Stack installation
39. 914.1Circuit vent permitted
40. 914.2Vent connection
41. 915.1Type of fixtures
42. 915.2Installation
43. 916.1Limitation
44. 916.2Vent connection
45. 916.3Vent installation below the fixture flood level rim
46. 917.1Single-stack vent system permitted
47. 918.1General