IRC 2021 · Model

Chapter 7: Wall Covering

55 sections in this chapter of the IRC 2021 model text — not Model's amended edition.

1. R701.1Application
2. R701.2Installation
3. R702.1General
4. R702.2.1Gypsum plaster
5. R702.2.2Cement plaster
6. R702.3.1Materials
7. R702.3.2Wood framing
8. R702.3.3Cold-formed steel framing
9. R702.3.4Insulating concrete form walls
10. R702.3.5Application
11. R702.3.6Horizontal gypsum board diaphragm ceilings
12. R702.3.7Water-resistant gypsum backing board
13. R702.4.1General
14. R702.4.2Backer boards
15. R702.5Other finishes
16. R702.6Wood shakes and shingles
17. R702.6.1Attachment
18. R702.7Vapor retarders
19. R703.1General
20. R703.1.1Water resistance
21. R703.11Vinyl siding
22. R703.11.1Installation
23. R703.12Adhered masonry veneer installation
24. R703.12.1Clearances
25. R703.13Insulated vinyl siding
26. R703.14Polypropylene siding
27. R703.2Water-resistive barrier
28. R703.3Wall covering nominal thickness and attachments
29. R703.3.1Soffit installation
30. R703.3.2Wind limitations
31. R703.4Flashing
32. R703.4.1Flashing installation at exterior window and door openings
33. R703.5Wood, hardboard and wood structural panel siding
34. R703.5.1Vertical wood siding
35. R703.6Wood shakes and shingles
36. R703.6.1Application
37. R703.6.2Weather exposure
38. R703.6.3Attachment
39. R703.7Exterior plaster (stucco)
40. R703.7.1Lath
41. R703.7.2Plaster
42. R703.7.3Water-resistive barriers
43. R703.7.4Application
44. R703.8Anchored stone and masonry veneer, general
45. R703.8.1Interior veneer support
46. R703.8.2Exterior veneer support
47. R703.8.3Lintels
48. R703.8.4Anchorage
49. R703.8.5Flashing
50. R703.8.6Weepholes
51. R703.9Exterior insulation and finish system (EIFS)/EIFS with drainage
52. R703.9.1Exterior insulation and finish systems (EIFS)
53. R704.1General wind limitations
54. R704.2Soffit installation where the design wind pressure is 30 psf or less
55. R704.3Soffit installation where the design wind pressure exceeds 30 psf