B
HomeLibrariesCopilotSearchProjectsBookmarks
FeedbackHelp Desk
Libraries
Building Codes
Code LibraryIBC — BuildingIRC — ResidentialIFC — FireIPC — PlumbingIMC — MechanicalIFGC — Fuel GasIECC — EnergyNEC — ElectricalModel Codes
Specifications
CSI SpecificationsDOT SpecsTransit SpecsUSACE
Standards
TransportationRailroadFire SafetyAccessibilityStructural
Tools & References
DiagramsAssembliesProductsCalculatorsChecklistsPermits
PricingLog in
Home / Assemblies / UL W127
UL W1273-hr Fire RatingFloor/CeilingLoad-BearingSTC 46
Wood JoistGypsum BoardFiberglass BattDesign

Wood Joist Floor/Ceiling — 3 layers 5/8" Type C gypsum board

UL-listed 3-hour fire-rated wood joist floor/ceiling assembly. 2x12 wood joists at 16" o.c. with R-30 fiberglass batt, 3 layers of 5/8" Type C gypsum board ceiling.

Cross-Section Diagram

1234567FLOOR/CEILING ASSEMBLYSECTION · NOT TO SCALE7 LAYERSsee legend for ① ② ③
Legend
1Floor covering(varies)
21-1/8" T&G plywood subfloor(1-1/8")
32x12 wood joists at 16" o.c.(11.25")
4R-30 fiberglass batt
55/8" Type C gypsum board(5/8")
65/8" Type C gypsum board(5/8")
75/8" Type C gypsum board(5/8")

Specifications

Fire Rating
3-Hour
STC Rating
STC 46
Load Bearing
Yes
Total Thickness
14.62"
Source / Publisher
UL (Underwriters Laboratories)
Design Number
W127
Assembly Type
Floor/Ceiling
Test Standard
CAN/ULC-S101
Construction Group
Light Frame
Number of Layers
7 layers

Applicable Codes

IBC 2021 Table 722.1IBC 2024 §722

Construction Summary

2x12 wood joists at 16" o.c. with R-30 fiberglass batt, 3 layers of 5/8" Type C gypsum board ceiling

Material Layers

LayerMaterialThickness
1Floor coveringvaries
21-1/8" T&G plywood subfloor1-1/8"
32x12 wood joists at 16" o.c.11.25"
4R-30 fiberglass batt—
55/8" Type C gypsum board5/8"
65/8" Type C gypsum board5/8"
75/8" Type C gypsum board5/8"

Important Notice

This assembly listing is for reference only. Always verify against the current UL Product iQ database before specifying in construction documents. Material substitutions may void the fire rating. Consult with a qualified fire protection engineer for project-specific requirements.