Products Library
194 building products with specs, certifications, sustainability data, and linked code references. Specs are compiled from public manufacturer data — verified entries cite the source they were checked against.
Looking for what a state DOT has approved? Browse state DOT approved product lists →
Deformed steel reinforcing bar, 1/2" nominal diameter, Grade 60 yield strength for general structural reinforcement.
A gun-grade latex intumescent firestop sealant that dries to a monolithic seal in joints and penetrations.
A single-component, neutral-cure intumescent silicone sealant that firestops joints and penetrations while also forming a water barrier.
A sprayable water-based firestop material that dries to a tough elastomeric coating for perimeter joints and construction joints.
Air-cooled whole-home standby generator with 200A transfer switch, runs on natural gas or LP.
Vinyl replacement windows with dual-pane Low-E glass, U-0.30, and optional between-the-glass blinds.
Energy-efficient wood windows with Fibrex exterior cladding, rated U-0.27 and SHGC 0.25 for optimal performance.
Fan-powered evaporative bypass humidifier for whole-house humidification, 18 gallons per day capacity.
Heavy-duty surface-mounted door closer for high-traffic commercial doors, ADA compliant adjustable closing force.
Engineered wood subfloor with enhanced moisture resistance and no-swell edges, tongue-and-groove profile.
Modern single-handle faucet, 1.2 GPM flow rate, ADA compliant lever handle, optional MotionSense.
Performance-rated oriented strand board sheathing for wall and roof sheathing, 15/32" thickness with 24/16 span rating.
Edge-lit LED panel for ceiling grid, 4000K, 5000 lumens, 0–10V dimming, DLC Premium listed.
Pre-faced glazed CMU with architectural finish, ideal for durable wall finishes in schools, corridors, and wet areas.
A fully biodegradable double-net straw erosion control blanket with jute scrim netting for short-term slope and swale stabilization.
Self-adhered vapor-permeable air and water-resistive barrier for commercial wall assemblies.
Cost-effective 200A main breaker load center with 20-space/40-circuit capacity, plug-on neutral bus.
PowerWash rim scrubs bowl with every flush, 1.28 GPF high-efficiency with EverClean antimicrobial glaze.
In-wall smart dimmer, 150W LED/CFL or 600W incandescent, works with Caséta wireless system and smart home platforms.
Structural softwood plywood with C-grade face and D-grade back for sheathing, wall bracing, and roof decking.
A 2-1/2 in. deep 33 mil CT shaft wall stud with 1-3/8 in. and 1-5/8 in. flanges that grips gypsum liner panels in cavity shaft wall construction.
A hat-shaped 7/8 in. furring channel in 18 mil galvanized steel used as cross-furring for gypsum ceilings and furred walls.
A 2-1/2 in. J-shaped runner with a 1 in. short leg and 2 in. long leg that anchors the top and bottom of a CT shaft wall assembly.
Fiberglass batts for commercial wall cavities, offered unfaced with a noncombustible rating for use in rated partitions and above suspended ceilings.
About the Products Library
Browse certified building products organized by CSI MasterFormat division. Each entry links to applicable code sections so you can jump straight from product to regulation. Illustrations are schematic category diagrams, not manufacturer artwork — always verify against current manufacturer documentation and local code before specifying.