150 High Impact Corner Guard

Inpro (Sunshine) · 154

A surface-mounted 90-degree corner guard assembly: a snap-on rigid vinyl cover over a continuous extruded aluminium retainer, supplied in stock heights for interior wall corners. Inpro's own product page gives the construction as a 3 in (76 mm) wing with a .080 in (2 mm) rigid vinyl cover on a .070 in (1.8 mm) continuous aluminium retainer, in uPVC, with an optional non-PVC cover in Inpro's G2 BioBlend reformulated PETG made with a corn-based biopolymer. Construction figures here are quoted from that page; no test report or data sheet was retrievable (see the manufacturer row).

✓ Verified 2026-09-13

Specs on this page were checked against Inpro 150 High Impact Corner Guard model 154 product page on inprocorp.com, RETRIEVED 2026-09-13 by lane C-fetch run 987. THIS FILLS THE SOURCE HALF OF THE run-165 FILL-OR-WITHDRAW MARK: there is now a first-party source_url on the manufacturer's own domain, actually retrieved, and the row's construction data is quoted from it. THE FIRE-CLASSIFICATION HALF IS NOT FILLED AND IS NOT PRETENDED TO BE - see linkage.limitsStated (1). VERIFIED AS TO: product identity, model designation, construction (cover material and thickness, retainer material and thickness, wing size, mounting type), and the UFGS 10 26 00 2.2.1 assembly limb. NOT VERIFIED AS TO: any ASTM E84, D256, D635, NFPA 286 or CAL 133 result, because every Inpro specification PDF is unretrievable. on 2026-09-13.

View on manufacturer site →

Specifications

Wing Size	2-1/2"
Length	8'
Material	PETG plastic

Certifications & Standards

ASTM E84 Class A

Sustainability

VOC Level

Low

Applies to Code Sections

Code sections where this product or product category is relevant. Click through to the viewer for full text and commentary.

IBC 803