Products Library
193 building products with specs, certifications, sustainability data, and linked code references. Specs are compiled from public manufacturer data — verified entries cite the source they were checked against.
High early strength concrete mix reaching 5000 PSI at 28 days, ideal for structural applications and cold weather pours.
Pre-blended concrete mix reaching 4,000 psi at 28 days, for slabs, footings, walkways, post setting and repairs.
General purpose portland cement for concrete where moderate sulfate resistance is required. Fineness and strength are plant-specific — take them from the mill certificate for the supplying plant.
Heavy-duty screw anchor for cracked and uncracked concrete. Installs in the same hole diameter it drills. Capacity is a strength-design value that depends on embedment, concrete strength, edge distance and spacing — take it from ESR-2713, not from a catalog headline.
Hex head screw anchor for concrete offering fast installation in cracked and uncracked conditions.
Deformed steel reinforcing bar, 1/2" nominal diameter, Grade 60 yield strength for general structural reinforcement.
Welded wire reinforcement for slabs-on-grade with 6"x6" grid and 0.192" wire diameter for crack control.
Liquid air-entraining admixture providing freeze-thaw protection in concrete by creating a stable air void system.
Generic slab-on-grade dowel basket for load transfer across a construction or contraction joint. Typical configuration only — no manufacturer product is cited. Dowel diameter and spacing follow slab thickness per ACI 302.1R.
Typical 4,000 psi ready-mixed concrete for general structural use. Ready-mix is batched locally to a project-specific mix design — there is no national product SKU; get the submitted mix design from your supplier.
Standard hollow concrete masonry unit, normal weight, for load-bearing and non-load-bearing walls.
Traditional modular clay brick suitable for both structural and veneer applications with superior weather resistance.
Pre-blended Type S mortar mix for above-grade load-bearing and below-grade masonry, exceeds 1800 PSI.
Adjustable 2-piece masonry veneer anchor with 3/16" diameter wire, hot-dip galvanized, for 1" to 5" cavities.
Factory-blended fine grout for filling masonry cells up to 2" minimum width, self-consolidating formulation available.
Pre-faced glazed CMU with architectural finish, ideal for durable wall finishes in schools, corridors, and wet areas.
Pre-deflected holdown for shearwall tie-down, ICC-ES evaluated for IBC/IRC. Allowable tension varies with post species and anchor rod — see the current Simpson catalog.
Double-shear face-mount hanger for 2x8 joists, provides superior load capacity through double-shear nailing.
Heavy-duty double-shear face-mount girder hanger, 12 gauge, for a 5-1/2" x 12" beam. Loads shown for DF/SP; reduce for lower specific-gravity framing.
Light-gauge cold-formed steel stud for interior and exterior wall framing, 2x4 nominal, 20-gauge (33 mil) with 1-5/8" flange.
Hot-rolled ASTM A992 wide flange beam, W8x31 section for light commercial framing, 31 lb/ft with 8" nominal depth.
Engineered wood I-joist with 1-3/4"-wide flanges and an OSB web, for straight, quiet floor framing at long spans.
Standard weight full-mortise ball bearing butt hinge for commercial steel and wood doors.
Medium strap tie for wood-to-wood or wood-to-concrete connections, 24" length with pre-punched nail holes.
About the Products Library
Browse certified building products organized by CSI MasterFormat division. Each entry links to applicable code sections so you can jump straight from product to regulation. Illustrations are schematic category diagrams, not manufacturer artwork — always verify against current manufacturer documentation and local code before specifying.