B
HomeLibrariesCopilotSearchProjectsBookmarks
FeedbackHelp Desk
Libraries
Building Codes
Code LibraryIBC — BuildingIRC — ResidentialIFC — FireIPC — PlumbingIMC — MechanicalIFGC — Fuel GasIECC — EnergyNEC — ElectricalModel Codes
Specifications
CSI SpecificationsDOT SpecsTransit SpecsUSACE
Standards
TransportationRailroadFire SafetyAccessibilityStructural
Tools & References
DiagramsAssembliesProductsCalculatorsChecklistsPermits
PricingLog in
Home / Assemblies / UL X107
UL X1071.5-hr Fire RatingBeamLoad-Bearing
Structural SteelDesign

Steel Beam — Intumescent coating

UL-listed 1.5-hour fire-rated steel beam assembly. W-shape steel beam with Intumescent coating, 1.5-hour fire rating.

Cross-Section Diagram

12BEAM PROTECTIONSECTION · NOT TO SCALE2 LAYERSsee legend for ① ② ③
Legend
1W-shape steel beam(13")
2Intumescent coating(0.095")

Specifications

Fire Rating
1.5-Hour
Load Bearing
Yes
Total Thickness
13.19"
Source / Publisher
UL (Underwriters Laboratories)
Design Number
X107
Assembly Type
Beam
Test Standard
UL 263
Construction Group
Non-Combustible
Number of Layers
2 layers

Applicable Codes

IBC 2024 §722IBC 2021 §722

Construction Summary

W-shape steel beam with Intumescent coating, 1.5-hour fire rating

Material Layers

LayerMaterialThickness
1W-shape steel beam13"
2Intumescent coating0.095"

Important Notice

This assembly listing is for reference only. Always verify against the current UL Product iQ database before specifying in construction documents. Material substitutions may void the fire rating. Consult with a qualified fire protection engineer for project-specific requirements.