UL U2461-hr Fire RatingWallSTC 52
Steel StudGypsum BoardFiberglass BattResilient ChannelPartitionDesign
Steel Stud Wall — single layer 1/2" Type X on resilient channels
UL-listed 1-hour fire-rated steel stud wall assembly. 2-1/2" steel studs at 24" o.c. with R-11 fiberglass batt, single layer of 1/2" Type X gypsum board each side on resilient channels.
Cross-Section Diagram
Legend
11/2" Type X gypsum board(1/2")
2Resilient channels at 24" o.c.(7/8")
32-1/2" steel studs at 24" o.c.(2.5")
4R-11 fiberglass batt
51/2" Type X gypsum board(1/2")
Specifications
Fire Rating
1-Hour
STC Rating
STC 52
Load Bearing
No
Total Thickness
4.375"
Applicable Codes
IBC 2021 Table 722.1IBC 2021 §722
Construction Summary
2-1/2" steel studs at 24" o.c. with R-11 fiberglass batt, single layer of 1/2" Type X gypsum board each side on resilient channels
Material Layers
Important Notice
This assembly listing is for reference only. Always verify against the current UL Product iQ database before specifying in construction documents. Material substitutions may void the fire rating. Consult with a qualified fire protection engineer for project-specific requirements.