Superelevation design follows AASHTO Method 5 (current AZ policy). Distribution tables are provided for maximum superelevation rates of 10% (rural) and 4% (urban/low-speed). Superelevation runoff length is based on design speed and number of lanes rotated. The axis of rotation is typically the centerline for undivided highways and the median edge for divided highways. Superelevation transitions through intersections require special treatment per Chapter 3.
References: AASHTO current edition, AZ Standard Specifications, FHWA Technical Advisories, and applicable federal regulations (23 CFR). Contractors shall maintain current copies of all referenced standards on the project site.
Source: ADOT Highway Design Manual, 2024 Edition. Pages 13–14 of 37.