2501 – PART V
2500-1SECTION 2501
PART V
2501.1GENERAL
In order to properly monitor materials on a project, follow all applicable procedures as outlined in the KDOT Construction Manual, Part V. This includes, but is not limited to, the sampling frequencies quantities and procedures; testing frequencies and procedures. Whenever a test procedure is required, use the Kansas Test (KT) procedures as outlined in Part V. Copies of Part V can be obtained by contacting the Plans and ProposalsS ection in the Bureau of Construction and Materials, the local DME, or the Quality Assurance Section at MRC. TABLE 2501-1 represents the current Part V revision dates applicable to the Contract.
TABLE 2501-1: PART V REVISION DATES SECTION TITLE REVISED
5.1GENERAL 2014
5.1.1 Materials Control Functions of the Bureau of Construction and Materials 2014
5.2QUALITY CONTROL/QUALITY ASSURANCE 2014
5.2.1 Statistics 2014 5.2.2 Rounding Off and Random Sampling 2014 5.2.2.1 Rounding-Off of Numbers 2012 5.2.2.2 Random Sampling 2014 5.2.3 Reasons for Quality Cont rol/Quality Assurance (QC/QA) and the Certified Inspection and Testing Training Program (CIT2) 2014 2010 5.2.5 Quality Control/Quality Assurance (QC/QA) Tests 2014 5.2.6 Comparison of Quality Control and Verification Tests 2014 5.2.7 Contractor’s Quality Control Plan 2014 5.2.7.1 HMA: Contractor’s Quality Control Plan 2014 5.2.7.2 Guide for Quality Control and Acceptance Requirements for HMA 2010 5.2.7.3 Example of a Laboratory Quality Manual for HMA 2014 5.2.7.4 Concrete: Contractor’s Quality Control Plan 2015 5.2.7.5 Example of a Laboratory Quality Manual for Concrete 2015 5.2.7.6 Concrete Structures: Contractor’s Quality Control Plan 2014 5.2.7.7 Example of a Contractor’s Concrete Structures Quality Control Plan for Controlling Evaporation 2010 5.2.7.8 Cement Treated Base: Contractor’s Quality Control Plan (CTB) 2014 5.2.7.8.1 Example of a Laboratory Quality Manual for CTB 2014
5.3MIX DESIGN METHODS 2010
5.3.1 Concrete Mix Design 2010 5.3.2 Bituminous Mix Design 2014 5.3.3 Superpave Mix Design 2010 5.3.4 Mix Design Procedures for CIR (Cold in Place Recycling) Material 2015
5.4LABORATORY AND SAMPLE IDENTIFICATION 2014
5.4.1 Laboratory Identification 2014