Structural concrete inspection includes formwork, reinforcing steel, pre-stress/post-tension, and placement for bridge decks, substructures, and retaining walls. Reinforcement inspection: bar size, spacing, cover depth per design plans. Splice lengths per AASHTO LRFD Section 5. Form tolerance: ±1/4 inch for exposed surfaces. Bridge deck placement: continuous pour preferred; cold joint locations require prior approval. Deck finishing per PA standard specifications.
References: AASHTO current edition, PA Standard Specifications, FHWA Technical Advisories, and applicable federal regulations (23 CFR). Contractors shall maintain current copies of all referenced standards on the project site.
Source: PennDOT Construction Manual, 2024 Edition. Pages 11–12 of 29.