Geotextile testing per AASHTO M 288 for separation, filtration, stabilization, and drainage applications. Required tests: grab tensile strength (AASHTO T 190), puncture resistance, permittivity, AOS (apparent opening size). Geogrid testing: tensile strength at 2% and 5% strain per GRI-GG1. PennDOT uses the Qualified Products List for approved geosynthetic products. Field installation per manufacturer specifications with minimum overlap of 12 inches for separation applications.
All work under this section shall comply with PennDOT current standards and applicable AASHTO, ASTM, and federal requirements. The Engineer has authority to accept or reject materials and workmanship that do not conform to the specifications.
Source: PennDOT Materials Testing Manual, 2024 Edition. Pages 23–24 of 25.