Line posts, anchor plates, and braces shall comply with ASTM A702, except that a hardness test may not be substituted for the tensile test. Steel posts, anchor plates, and braces shall be galvanized in accordance with ASTM A123.
1010.04 STAPLES AND NAILS. Staples and nails shall be made of
galvanized steel wire. Minimum galvanized coating shall be not less than 0.20 ounce per square foot when tested in accordance with ASTM A90.
1010.05 METAL FASTENERS FOR STEEL POSTS. Metal
fasteners for steel posts shall be galvanized steel -wire fasteners or clamps and shall be satisfactory for use with the type of steel post furnished. Wire shall be not less than 0.120 inch diameter. Galvanized coating shall not be less than 0.20 ounce per square foot when tested in accordance with ASTM A90.
1010.06 Gates for Field and Line Type Fence.
1010.06.1 Gates: Steel used in fabricating gates shall be galvanized
in accordance with ASTM A653 Coating Designation G60.
1010.06.2 Posts:
1010.06.2 1 Treated Timber : Comply with Section 1014 .
1010.06.2 2 Metal: Metal posts shall be made of galvanized steel
pipe, standard weight, complying with ASTM A53.
1010.06.3 Hardware: Hinges, washers , nails, staples, welded chains,
and latches shall be galvanized, of acceptable quality, and of satisfactory type for use with the gate and posts selected.
1010.06.4 Gate Stops:
1010.06.4 1 Treated Timber: Gate stops shall be timber
complying with 1010.03.1 treated in the same manner as posts.
1010.06.4 2 Metal: Gate stops shall be acceptable galvani zed
steel suitable for welding to the post.
1010.06.5 Stop Posts: Stop posts for double swinging driveway
gates shall be treated timber complying with Section 1014 . Line posts, anchor plates, and braces shall comply with ASTM A702, except that a hardness test may not be substituted for the tensile test. Steel posts, anchor plates, and braces shall be galvanized in accordance with ASTM A123.
1010.04 STAPLES AND NAILS. Staples and nails shall be made of
galvanized steel wire. Minimum galvanized coating shall be not less than 0.20 ounce per square foot when tested in accordance with ASTM A90.
1010.05 METAL FASTENERS FOR STEEL POSTS. Metal
fasteners for steel posts shall be galvanized steel -wire fasteners or clamps and shall be satisfactory for use with the type of steel post furnished. Wire shall be not less than 0.120 inch diameter. Galvanized coating shall not be less than 0.20 ounce per square foot when tested in accordance with ASTM A90.
1010.06 Gates for Field and Line Type Fence.
1010.06.1 Gates: Steel used in fabricating gates shall be galvanized
in accordance with ASTM A653 Coating Designation G60.
1010.06.2 Posts:
1010.06.2 1 Treated Timber : Comply with Section 1014 .
1010.06.2 2 Metal: Metal posts shall be made of galvanized steel
pipe, standard weight, complying with ASTM A53.
1010.06.3 Hardware: Hinges, washers , nails, staples, welded chains,
and latches shall be galvanized, of acceptable quality, and of satisfactory type for use with the gate and posts selected.
1010.06.4 Gate Stops:
1010.06.4 1 Treated Timber: Gate stops shall be timber
complying with 1010.03.1 treated in the same manner as posts.
1010.06.4 2 Metal: Gate stops shall be acceptable galvani zed
steel suitable for welding to the post.
1010.06.5 Stop Posts: Stop posts for double swinging driveway
gates shall be treated timber complying with Section 1014 . Line posts, anchor plates, and braces shall comply with ASTM A702, except that a hardness test may not be substituted for the tensile test. Steel posts, anchor plates, and braces shall be galvanized in accordance with ASTM A123.
1010.04 STAPLES AND NAILS. Staples and nails shall be made of
galvanized steel wire. Minimum galvanized coating shall be not less than 0.20 ounce per square foot when tested in accordance with ASTM A90.
1010.05 METAL FASTENERS FOR STEEL POSTS. Metal
fasteners for steel posts shall be galvanized steel -wire fasteners or clamps and shall be satisfactory for use with the type of steel post furnished. Wire shall be not less than 0.120 inch diameter. Galvanized coating shall not be less than 0.20 ounce per square foot when tested in accordance with ASTM A90.
1010.06 Gates for Field and Line Type Fence.
1010.06.1 Gates: Steel used in fabricating gates shall be galvanized
in accordance with ASTM A653 Coating Designation G60.
1010.06.2 Posts:
1010.06.2 1 Treated Timber : Comply with Section 1014 .
1010.06.2 2 Metal: Metal posts shall be made of galvanized steel
pipe, standard weight, complying with ASTM A53.
1010.06.3 Hardware: Hinges, washers , nails, staples, welded chains,
and latches shall be galvanized, of acceptable quality, and of satisfactory type for use with the gate and posts selected.
1010.06.4 Gate Stops:
1010.06.4 1 Treated Timber: Gate stops shall be timber
complying with 1010.03.1 treated in the same manner as posts.
1010.06.4 2 Metal: Gate stops shall be acceptable galvani zed
steel suitable for welding to the post.
1010.06.5 Stop Posts: Stop posts for double swinging driveway
gates shall be treated timber complying with Section 1014 . Line posts, anchor plates, and braces shall comply with ASTM A702, except that a hardness test may not be substituted for the tensile test. Steel posts, anchor plates, and braces shall be galvanized in accordance with ASTM A123.
1010.04 STAPLES AND NAILS. Staples and nails shall be made of
galvanized steel wire. Minimum galvanized coating shall be not less than 0.20 ounce per square foot when tested in accordance with ASTM A90.
1010.05 METAL FASTENERS FOR STEEL POSTS. Metal
fasteners for steel posts shall be galvanized steel -wire fasteners or clamps and shall be satisfactory for use with the type of steel post furnished. Wire shall be not less than 0.120 inch diameter. Galvanized coating shall not be less than 0.20 ounce per square foot when tested in accordance with ASTM A90.
1010.06 Gates for Field and Line Type Fence.
1010.06.1 Gates: Steel used in fabricating gates shall be galvanized
in accordance with ASTM A653 Coating Designation G60.
1010.06.2 Posts:
1010.06.2 1 Treated Timber : Comply with Section 1014 .
1010.06.2 2 Metal: Metal posts shall be made of galvanized steel
pipe, standard weight, complying with ASTM A53.
1010.06.3 Hardware: Hinges, washers , nails, staples, welded chains,
and latches shall be galvanized, of acceptable quality, and of satisfactory type for use with the gate and posts selected.
1010.06.4 Gate Stops:
1010.06.4 1 Treated Timber: Gate stops shall be timber
complying with 1010.03.1 treated in the same manner as posts.
1010.06.4 2 Metal: Gate stops shall be acceptable galvani zed
steel suitable for welding to the post.
1010.06.5 Stop Posts: Stop posts for double swinging driveway
gates shall be treated timber complying with Section 1014 . Line posts, anchor plates, and braces shall comply with ASTM A702, except that a hardness test may not be substituted for the tensile test. Steel posts, anchor plates, and braces shall be galvanized in accordance with ASTM A123.
1010.04 STAPLES AND NAILS. Staples and nails shall be made of
galvanized steel wire. Minimum galvanized coating shall be not less than 0.20 ounce per square foot when tested in accordance with ASTM A90.
1010.05 METAL FASTENERS FOR STEEL POSTS. Metal
fasteners for steel posts shall be galvanized steel -wire fasteners or clamps and shall be satisfactory for use with the type of steel post furnished. Wire shall be not less than 0.120 inch diameter. Galvanized coating shall not be less than 0.20 ounce per square foot when tested in accordance with ASTM A90.
1010.06 Gates for Field and Line Type Fence.
1010.06.1 Gates: Steel used in fabricating gates shall be galvanized
in accordance with ASTM A653 Coating Designation G60.
1010.06.2 Posts:
1010.06.2 1 Treated Timber : Comply with Section 1014 .
1010.06.2 2 Metal: Metal posts shall be made of galvanized steel
pipe, standard weight, complying with ASTM A53.
1010.06.3 Hardware: Hinges, washers , nails, staples, welded chains,
and latches shall be galvanized, of acceptable quality, and of satisfactory type for use with the gate and posts selected.
1010.06.4 Gate Stops:
1010.06.4 1 Treated Timber: Gate stops shall be timber
complying with 1010.03.1 treated in the same manner as posts.
1010.06.4 2 Metal: Gate stops shall be acceptable galvani zed
steel suitable for welding to the post.
1010.06.5 Stop Posts: Stop posts for double swinging driveway
gates shall be treated timber complying with Section 1014 . Line posts, anchor plates, and braces shall comply with ASTM A702, except that a hardness test may not be substituted for the tensile test. Steel posts, anchor plates, and braces shall be galvanized in accordance with ASTM A123.
1010.04 STAPLES AND NAILS. Staples and nails shall be made of
galvanized steel wire. Minimum galvanized coating shall be not less than 0.20 ounce per square foot when tested in accordance with ASTM A90.
1010.05 METAL FASTENERS FOR STEEL POSTS. Metal
fasteners for steel posts shall be galvanized steel -wire fasteners or clamps and shall be satisfactory for use with the type of steel post furnished. Wire shall be not less than 0.120 inch diameter. Galvanized coating shall not be less than 0.20 ounce per square foot when tested in accordance with ASTM A90.
1010.06 Gates for Field and Line Type Fence.
1010.06.1 Gates: Steel used in fabricating gates shall be galvanized
in accordance with ASTM A653 Coating Designation G60.
1010.06.2 Posts:
1010.06.2 1 Treated Timber : Comply with Section 1014 .
1010.06.2 2 Metal: Metal posts shall be made of galvanized steel
pipe, standard weight, complying with ASTM A53.
1010.06.3 Hardware: Hinges, washers , nails, staples, welded chains,
and latches shall be galvanized, of acceptable quality, and of satisfactory type for use with the gate and posts selected.
1010.06.4 Gate Stops:
1010.06.4 1 Treated Timber: Gate stops shall be timber
complying with 1010.03.1 treated in the same manner as posts.
1010.06.4 2 Metal: Gate stops shall be acceptable galvani zed
steel suitable for welding to the post.
1010.06.5 Stop Posts: Stop posts for double swinging driveway
gates shall be treated timber complying with Section 1014 . Line posts, anchor plates, and braces shall comply with ASTM A702, except that a hardness test may not be substituted for the tensile test. Steel posts, anchor plates, and braces shall be galvanized in accordance with ASTM A123.
1010.04 STAPLES AND NAILS. Staples and nails shall be made of
galvanized steel wire. Minimum galvanized coating shall be not less than 0.20 ounce per square foot when tested in accordance with ASTM A90.
1010.05 METAL FASTENERS FOR STEEL POSTS. Metal
fasteners for steel posts shall be galvanized steel -wire fasteners or clamps and shall be satisfactory for use with the type of steel post furnished. Wire shall be not less than 0.120 inch diameter. Galvanized coating shall not be less than 0.20 ounce per square foot when tested in accordance with ASTM A90.
1010.06 Gates for Field and Line Type Fence.
1010.06.1 Gates: Steel used in fabricating gates shall be galvanized
in accordance with ASTM A653 Coating Designation G60.
1010.06.2 Posts:
1010.06.2 1 Treated Timber : Comply with Section 1014 .
1010.06.2 2 Metal: Metal posts shall be made of galvanized steel
pipe, standard weight, complying with ASTM A53.
1010.06.3 Hardware: Hinges, washers , nails, staples, welded chains,
and latches shall be galvanized, of acceptable quality, and of satisfactory type for use with the gate and posts selected.
1010.06.4 Gate Stops:
1010.06.4 1 Treated Timber: Gate stops shall be timber
complying with 1010.03.1 treated in the same manner as posts.
1010.06.4 2 Metal: Gate stops shall be acceptable galvani zed
steel suitable for welding to the post.
1010.06.5 Stop Posts: Stop posts for double swinging driveway
gates shall be treated timber complying with Section 1014 . Line posts, anchor plates, and braces shall comply with ASTM A702, except that a hardness test may not be substituted for the tensile test. Steel posts, anchor plates, and braces shall be galvanized in accordance with ASTM A123.
1010.04 STAPLES AND NAILS. Staples and nails shall be made of
galvanized steel wire. Minimum galvanized coating shall be not less than 0.20 ounce per square foot when tested in accordance with ASTM A90.
1010.05 METAL FASTENERS FOR STEEL POSTS. Metal
fasteners for steel posts shall be galvanized steel -wire fasteners or clamps and shall be satisfactory for use with the type of steel post furnished. Wire shall be not less than 0.120 inch diameter. Galvanized coating shall not be less than 0.20 ounce per square foot when tested in accordance with ASTM A90.
1010.06 Gates for Field and Line Type Fence.
1010.06.1 Gates: Steel used in fabricating gates shall be galvanized
in accordance with ASTM A653 Coating Designation G60.
1010.06.2 Posts:
1010.06.2 1 Treated Timber : Comply with Section 1014 .
1010.06.2 2 Metal: Metal posts shall be made of galvanized steel
pipe, standard weight, complying with ASTM A53.
1010.06.3 Hardware: Hinges, washers , nails, staples, welded chains,
and latches shall be galvanized, of acceptable quality, and of satisfactory type for use with the gate and posts selected.
1010.06.4 Gate Stops:
1010.06.4 1 Treated Timber: Gate stops shall be timber
complying with 1010.03.1 treated in the same manner as posts.
1010.06.4 2 Metal: Gate stops shall be acceptable galvani zed
steel suitable for welding to the post.
1010.06.5 Stop Posts: Stop posts for double swinging driveway
gates shall be treated timber complying with Section 1014 . Line posts, anchor plates, and braces shall comply with ASTM A702, except that a hardness test may not be substituted for the tensile test. Steel posts, anchor plates, and braces shall be galvanized in accordance with ASTM A123.
1010.04 STAPLES AND NAILS. Staples and nails shall be made of
galvanized steel wire. Minimum galvanized coating shall be not less than 0.20 ounce per square foot when tested in accordance with ASTM A90.
1010.05 METAL FASTENERS FOR STEEL POSTS. Metal
fasteners for steel posts shall be galvanized steel -wire fasteners or clamps and shall be satisfactory for use with the type of steel post furnished. Wire shall be not less than 0.120 inch diameter. Galvanized coating shall not be less than 0.20 ounce per square foot when tested in accordance with ASTM A90.
1010.06 Gates for Field and Line Type Fence.
1010.06.1 Gates: Steel used in fabricating gates shall be galvanized
in accordance with ASTM A653 Coating Designation G60.
1010.06.2 Posts:
1010.06.2 1 Treated Timber : Comply with Section 1014 .
1010.06.2 2 Metal: Metal posts shall be made of galvanized steel
pipe, standard weight, complying with ASTM A53.
1010.06.3 Hardware: Hinges, washers , nails, staples, welded chains,
and latches shall be galvanized, of acceptable quality, and of satisfactory type for use with the gate and posts selected.
1010.06.4 Gate Stops:
1010.06.4 1 Treated Timber: Gate stops shall be timber
complying with 1010.03.1 treated in the same manner as posts.
1010.06.4 2 Metal: Gate stops shall be acceptable galvani zed
steel suitable for welding to the post.
1010.06.5 Stop Posts: Stop posts for double swinging driveway
gates shall be treated timber complying with Section 1014 . Line posts, anchor plates, and braces shall comply with ASTM A702, except that a hardness test may not be substituted for the tensile test. Steel posts, anchor plates, and braces shall be galvanized in accordance with ASTM A123.
1010.04 STAPLES AND NAILS. Staples and nails shall be made of
galvanized steel wire. Minimum galvanized coating shall be not less than 0.20 ounce per square foot when tested in accordance with ASTM A90.
1010.05 METAL FASTENERS FOR STEEL POSTS. Metal
fasteners for steel posts shall be galvanized steel -wire fasteners or clamps and shall be satisfactory for use with the type of steel post furnished. Wire shall be not less than 0.120 inch diameter. Galvanized coating shall not be less than 0.20 ounce per square foot when tested in accordance with ASTM A90.
1010.06 Gates for Field and Line Type Fence.
1010.06.1 Gates: Steel used in fabricating gates shall be galvanized
in accordance with ASTM A653 Coating Designation G60.
1010.06.2 Posts:
1010.06.2 1 Treated Timber : Comply with Section 1014 .
1010.06.2 2 Metal: Metal posts shall be made of galvanized steel
pipe, standard weight, complying with ASTM A53.
1010.06.3 Hardware: Hinges, washers , nails, staples, welded chains,
and latches shall be galvanized, of acceptable quality, and of satisfactory type for use with the gate and posts selected.
1010.06.4 Gate Stops:
1010.06.4 1 Treated Timber: Gate stops shall be timber
complying with 1010.03.1 treated in the same manner as posts.
1010.06.4 2 Metal: Gate stops shall be acceptable galvani zed
steel suitable for welding to the post.
1010.06.5 Stop Posts: Stop posts for double swinging driveway
gates shall be treated timber complying with Section 1014 .