B
HomeLibrariesCode AISearchProjectsBookmarksAddress
FeedbackHelp Desk
Calculators
All Calculators
Permits
Permit Fee
Egress
Occupant Load & Egress
Structural
Beam SpanConcrete VolumeExcavationDeck Footings
Electrical
Electrical LoadWire Size
Mechanical
HVAC Load
Fire Safety
Fire Resistance
General
Stair Layout
Elsewhere
Code LibraryDiagramsAssembliesChecklistsNeed a custom calculation? →
PricingLog in
Home / Calculators / Building Permit Fee Calculator

Wichita, Kansas Building Permit Cost Calculator

Estimates permit cost in Wichita from the city's own published fee schedule — not a national average. Every figure is computed from a rule quoted verbatim from that document, and rules that cannot be computed honestly are shown as the published text instead of a number.

217 jurisdictions with fee schedules on file

Total cost of work, labor and materials

Used by cities that price per square foot

Fences and retaining walls

Electrical permits priced by the ampere

Building Permit

These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.

Residential new build, finished space
38 cents for each square foot
see rule
Residential new build, unfinished space
30 cents for each square foot
see rule
Non-commercial accessory structure, finished space
25 cents for each square foot
see rule
Non-commercial accessory structure, unfinished space
20 cents for each square foot
see rule
Accessory structure unfinished space over 5,000 square feet
20 cents for each square foot for the first 5,000 square feet and 10 cents for each additional unfinished square foot thereafter
see rule
Plan review · add-on
60% of the building permit fee — select the permit fee line above to calculate
see rule
○Reinspection fees
Flat fee $50.00
$50.00
○Inspections outside of normal business hours (minimum charge two hours)
Flat fee $60.00
$60.00
○Wrecking permit
Flat fee $50.00
$50.00
How this jurisdiction calculates the fee

Residential new construction is charged per square foot, with separate rates for finished and unfinished space and lower rates for non-commercial accessory structures. Remodels and rebuilds are charged on the valuation schedule in Table B instead of per square foot.

Source: published fee schedule · Verified 10/29/2026

Deck Permit

These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.

Table C, item 4 - Plan review · add-on
60% of the building permit fee — select the permit fee line above to calculate
see rule
Table B(1) Residential - New Build, finished space
38 cents for each square foot
see rule
Table B(1) Residential - New Build, non-commercial accessory structure (all private, non-dwelling structures on residential property), unfinished space
20 cents for each square foot
see rule
○Table B(3) all remodels or rebuilds, residential and commercial, charged on the Table B(2) valuation schedule: $1.00 to $1,000.00 total valuation
Flat fee $40.00
$40.00
○Table C, item 2 - Reinspection fees
Flat fee $50.00
$50.00
How this jurisdiction calculates the fee

A permit is required once a deck, stoop or porch is more than 30 inches above adjacent grade without overhead structures and not over a basement or story below (UBTC Sec. 2.4.020 residential exemption 6; the commercial list is exemption 14). MABCD Tables A through K contain no deck-specific fee line. A deck is therefore charged as an ordinary building permit under Table B - per square foot for residential new build and accessory structures, or on the commercial valuation schedule for remodels and rebuilds - plus plan review at 60% of the building permit fee under Table C.

Source: published fee schedule · Verified 9/15/2026

Electrical Permit

These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.

○120 volt Circuit
Flat fee $2.00
$2.00
○Outlets Added to Existing Circuit
Flat fee $0.75
$0.75
○Light Fixture or Lampholding Device (also retrofits of fixtures)
Flat fee $0.75
$0.75
○Smoke Detectors
Flat fee $0.75
$0.75
○Clothes Dryer
Flat fee $8.00
$8.00
○Range or Heat Device 4500 watt or over
Flat fee $8.00
$8.00
○Service 480 volts or less, per meter (100 Amps or less)
Flat fee $11.00
$11.00
○Service 480 volts or less, each additional amp
Flat fee $0.06
$0.06
○Generator
Flat fee $29.00
$29.00
○Photovoltaic(Solar) system
Flat fee $29.00
$29.00
○Pool, Hot tub / Sauna or Jacuzzi
Flat fee $14.00
$14.00
○Water Well Motor
Flat fee $7.00
$7.00
○Permit Issuance Fee
Flat fee $25.00
$25.00
How this jurisdiction calculates the fee

Electrical permits are charged per circuit, device, service or item of work under Table I, plus a permit issuance fee.

Source: published fee schedule · Verified 10/30/2026

Fence Permit

These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.

Table C, item 4 - Plan review · add-on
60% of the building permit fee — select the permit fee line above to calculate
see rule
○Table B(3) all remodels or rebuilds, residential and commercial, charged on the Table B(2) valuation schedule: $1.00 to $1,000.00 total valuation
Flat fee $40.00
$40.00
Table B(2) Commercial - New Build: $1,001.00 to $2,000.00 total valuation
$40.00 for the first $1,000.00 plus $3.00 for each additional $100.00, or fraction thereof, to and including $2,000.00
see rule
○Table C, item 2 - Reinspection fees
Flat fee $50.00
$50.00
How this jurisdiction calculates the fee

A permit is required for concrete or masonry fences over 4 feet high measured from the bottom of the footing to the top of the wall, and for other fences over 8 feet high, in the residential code (UBTC Sec. 2.4.020 exemption 2); in the commercial code the masonry threshold is 30 inches and any fence enclosing an outdoor seating area needs a permit (exemption 7(a)). MABCD Tables A through K contain no fence-specific fee line, so a fence permit is charged as an ordinary building permit under Table B plus plan review at 60% of the building permit fee under Table C.

Source: published fee schedule · Verified 9/15/2026

Reroof Permit

These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.

Roofing permit
$ .05 per sq. ft. based upon structure footprint. Min. - $50, Max. - $1,500
see rule
Siding permit
Based upon valuation stated in Table B (2) above
see rule
How this jurisdiction calculates the fee

The roofing permit fee is charged per square foot of the structure footprint, subject to a minimum and a maximum.

Source: published fee schedule · Verified 10/30/2026

Retaining Wall Permit

These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.

Table C, item 4 - Plan review · add-on
60% of the building permit fee — select the permit fee line above to calculate
see rule
○Table B(3) all remodels or rebuilds, residential and commercial, charged on the Table B(2) valuation schedule: $1.00 to $1,000.00 total valuation
Flat fee $40.00
$40.00
Table B(2) Commercial - New Build: $2,001.00 to $40,000.00 total valuation
$70.00 for the first $2,000.00 plus $11.00 for each additional $1,000.00, or fraction thereof, to and including $40,000.00
see rule
○Table C, item 2 - Reinspection fees
Flat fee $50.00
$50.00
How this jurisdiction calculates the fee

A permit is required for a retaining wall over 4 feet high measured from the bottom of the footing to the top of the wall, or for any wall supporting a surcharge (UBTC Sec. 2.4.020 residential exemption 3); in the commercial code the threshold is 30 inches measured from the lowest point of adjoining grade, or any height if the wall supports a surcharge or impounds Class I, II or IIIA liquids (exemption 4). MABCD Tables A through K contain no retaining-wall-specific fee line, so the wall is charged as an ordinary building permit under Table B plus plan review at 60% of the building permit fee under Table C.

Source: published fee schedule · Verified 9/15/2026

Shed Permit

These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.

○Location permit
Flat fee $50.00
$50.00
Non-commercial accessory structure, unfinished space
20 cents for each square foot
see rule
Non-commercial accessory structure, finished space
25 cents for each square foot
see rule
How this jurisdiction calculates the fee

A location permit is charged at a flat rate under Table C. An accessory structure that requires a building permit is charged per square foot under Table B, at the accessory structure rate.

Source: published fee schedule · Verified 10/30/2026

Water Heater Permit

These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.

○Water Heater New or Replacement
Flat fee $9.00
$9.00
○Permit Issuance Fee
Flat fee $25.00
$25.00
○Gas Opening / Pressure Test
Flat fee $9.00
$9.00
○Gas Meter Loop / Pressure Test
Flat fee $9.00
$9.00
○Water Service New or Replacement
Flat fee $5.00
$5.00
○Waste Openings
Flat fee $4.50
$4.50
○Backflow Device
Flat fee $5.00
$5.00
How this jurisdiction calculates the fee

Plumbing permits are charged per fixture or item of work under Table H, plus a permit issuance fee.

Source: published fee schedule · Verified 11/2/2026

See the full write-up: Wichita building permit cost

Estimate only.Fee schedules change, and building departments set the final valuation and decide which fees apply to your scope. Confirm with the jurisdiction before budgeting. Lines marked “see rule” could not be computed from the published wording and are shown verbatim rather than guessed.