Detroit, Michigan Building Permit Cost Calculator
Estimates permit cost in Detroit from the city's own published fee schedule — not a national average. Every figure is computed from a rule quoted verbatim from that document, and rules that cannot be computed honestly are shown as the published text instead of a number.
217 jurisdictions with fee schedules on file
Total cost of work, labor and materials
Used by cities that price per square foot
Fences and retaining walls
Electrical permits priced by the ampere
Building Permit
These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.
How this jurisdiction calculates the fee
The building permit fee is set by City Council resolution and is calculated from the volume of the building or structure, the total cost of the improvement, and a schedule of unit costs for the applicable use and occupancy group and type of construction.
Source: published fee schedule · Verified 8/3/2026
Electrical Permit
These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.
○Base fee Flat fee $66.00 | $66.00 |
○A1 Circuits - each circuit (New or Extended, Altered or Removed) Flat fee $20.00 | $20.00 |
○A2 Rough inspection (concealed wiring, each permit) - for inspection of single-family or two-family dwellings Flat fee $59.00 | $59.00 |
○A3 Fixtures - residential, per fixture Flat fee $1.17 | $1.17 |
○A3 Fixtures - commercial (luminaires), per fixture Flat fee $1.46 | $1.46 |
○A4 Motors/transformers, 1/4 HP, KW or KVA to 10 HP, KW, KVA or power plug, each Flat fee $29.00 | $29.00 |
○A5 Service, 100 or less amperes, each Flat fee $59.00 | $59.00 |
○A5 Service, over 100 to 200 amperes, each Flat fee $117.00 | $117.00 |
○A7 Distribution panel boards, 100 amps or less, each Flat fee $51.00 | $51.00 |
○A9 Feeders, each 100 feet or fraction thereof Flat fee $41.00 | $41.00 |
○A12 Sign connection, each circuit, sign or sign section Flat fee $22.00 | $22.00 |
○A14 Residential smoke alarms, hard-wired / interconnected, each Flat fee $2.81 | $2.81 |
How this jurisdiction calculates the fee
BSEED electrical permits are charged as a flat base fee plus per-item unit charges: per circuit, per fixture, per service by ampere rating, per distribution panel by ampere rating, per motor/transformer by horsepower, per 100 feet of feeder, and so on. There is no valuation-based or square-foot electrical fee.
Source: published fee schedule · Verified 9/15/2026
See the full write-up: Detroit building permit cost
Estimate only.Fee schedules change, and building departments set the final valuation and decide which fees apply to your scope. Confirm with the jurisdiction before budgeting. Lines marked “see rule” could not be computed from the published wording and are shown verbatim rather than guessed.