Baton Rouge, Louisiana Building Permit Cost Calculator
Estimates permit cost in Baton Rouge from the city's own published fee schedule — not a national average. Every figure is computed from a rule quoted verbatim from that document, and rules that cannot be computed honestly are shown as the published text instead of a number.
217 jurisdictions with fee schedules on file
Total cost of work, labor and materials
Used by cities that price per square foot
Fences and retaining walls
Electrical permits priced by the ampere
Building Permit
These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.
Residential New Building $0.80/square foot ($125 minimum) | see rule |
Residential Remodel $0.80/square foot +$125 ($250 minimum) | see rule |
Residential Addition $0.80/square foot +125 ($250 minimum) | see rule |
○Residential Mechanical, Electrical or Plumbing, Gas Trade Permits Flat fee $125.00 | $125.00 |
○Commercial Permit Fee, valuation up to $100,000 Flat fee $5.00 | $5.00 |
○Commercial Plan Review, valuation up to $500,000 Flat fee $3.00 | $3.00 |
○Technology Fee Flat fee $25.00 | $25.00 |
○Reinspection Fees Flat fee $75.00 | $75.00 |
○After Hours Fee Flat fee $150.00 | $150.00 |
Credit Card Fee 5% | see rule |
How this jurisdiction calculates the fee
Baton Rouge charges residential building permits by finished floor area and commercial permits by construction valuation, under the schedule the city-parish publishes on its Permit and Inspection Fees page. A technology fee is added to every permit and card payments carry a surcharge. Section 8:801 of the Code of Ordinances, adopted by Ordinance 18690 and amended by Ordinance 18848 on May 10, 2023, lists lower figures for several of the same items, including a fifteen dollar technology fee and a residential new building permit folded into the plan review fee. Section 8:801 directs that permits be charged according to the schedule set by the governing authority, so the published schedule controls where the two differ.
Source: published fee schedule · Verified 11/13/2026
Deck Permit
These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.
Residential Remodel (governing category; no deck-specific line is published) $0.80/square foot +$125 ($250 minimum) | see rule |
Residential Addition (governing category; no deck-specific line is published) $0.80/square foot +125 ($250 minimum) | see rule |
○Technology Fee Flat fee $25.00 | $25.00 |
○Reinspection Fees Flat fee $75.00 | $75.00 |
How this jurisdiction calculates the fee
Baton Rouge publishes no fee specific to decks. A deck that needs a permit is charged under the residential building categories on the Permit and Inspection Fees page, which price remodels and additions by finished floor area with a stated minimum, plus the technology fee added to every permit. The city-parish exempts a deck smaller than 200 square feet whose walking surface sits no higher than 30 inches off the ground, provided it stands in a buildable area of the lot.
Source: published fee schedule · Verified 11/13/2026
Electrical Permit
These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.
○Residential Mechanical, Electrical or Plumbing, Gas Trade Permits Flat fee $125.00 | $125.00 |
○Commercial MEP Trade Permit, valuation up to $100,000 Flat fee $125.00 | $125.00 |
○Commercial MEP Trade Permit, valuation $100,001 to $500,000 Flat fee $300.00 | $300.00 |
○Commercial MEP Trade Permit, valuation $500,001 to $2,000,000 Flat fee $400.00 | $400.00 |
○Commercial MEP Trade Permit, valuation over $2,000,000 Flat fee $600.00 | $600.00 |
○Residential Solar Flat fee $375.00 | $375.00 |
○Residential Generator Flat fee $500.00 | $500.00 |
○Technology Fee Flat fee $25.00 | $25.00 |
How this jurisdiction calculates the fee
Residential electrical work in Baton Rouge is charged a flat trade permit fee that also covers the mechanical, plumbing and gas trades, under the Permit and Inspection Fees page. Commercial electrical permits are tiered by construction valuation. Section 8:801 of the Code of Ordinances sets the electrical trade permit for new residential construction at zero because it is folded into the plan review fee, and charges the same flat amount for all other residential electrical work. A technology fee applies to every permit.
Source: published fee schedule · Verified 11/13/2026
Fence Permit
These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.
○Residential Fence Flat fee $250.00 | $250.00 |
○Technology Fee Flat fee $25.00 | $25.00 |
○Reinspection Fees Flat fee $75.00 | $75.00 |
Credit Card Fee 5% | see rule |
How this jurisdiction calculates the fee
Baton Rouge charges a flat residential fence permit fee under the Permit and Inspection Fees page, plus the technology fee added to every permit. Section 8:801 of the Code of Ordinances instead groups fences with other residential building permits at a lower flat figure, so the code and the published schedule disagree on this item.
Source: published fee schedule · Verified 11/13/2026
Reroof Permit
These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.
Residential Remodel (governing category; no roofing-specific line is published) $0.80/square foot +$125 ($250 minimum) | see rule |
○Technology Fee Flat fee $25.00 | $25.00 |
○Reinspection Fees Flat fee $75.00 | $75.00 |
How this jurisdiction calculates the fee
Baton Rouge publishes no fee specific to roofing. Roof replacement requires a permit, as does replacing more than 100 square feet of roof decking, and the charge falls under the residential building categories on the Permit and Inspection Fees page, which price remodels by finished floor area with a stated minimum. A technology fee applies to every permit. Louisiana House Bill 393, effective August 1, 2023, adds photographic documentation requirements to reroofing inspections but sets no city fee.
Source: published fee schedule · Verified 11/13/2026
Retaining Wall Permit
These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.
Residential Remodel (governing category; no retaining-wall line is published) $0.80/square foot +$125 ($250 minimum) | see rule |
○Small Lot Grading Permit Flat fee $250.00 | $250.00 |
○Technology Fee Flat fee $25.00 | $25.00 |
○Reinspection Fees Flat fee $75.00 | $75.00 |
How this jurisdiction calculates the fee
Baton Rouge publishes no fee specific to retaining walls. A retaining wall four feet or taller requires a permit and a shorter one does not. A wall that needs a permit is charged under the residential building categories on the Permit and Inspection Fees page, which price remodels and additions by finished floor area with a stated minimum, plus the technology fee added to every permit.
Source: published fee schedule · Verified 11/16/2026
Shed Permit
These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.
Residential Accessory $0.80/ square foot +125 ( EMP’s not included) | see rule |
○Residential Mechanical, Electrical or Plumbing, Gas Trade Permits Flat fee $125.00 | $125.00 |
○Technology Fee Flat fee $25.00 | $25.00 |
○Flood Zone Determination Flat fee $25.00 | $25.00 |
○Reinspection Fees Flat fee $75.00 | $75.00 |
Credit Card Fee 5% | see rule |
How this jurisdiction calculates the fee
Residential accessory structures are charged per square foot plus a flat amount, with mechanical, electrical and plumbing trade permits charged separately; a technology fee applies to all permits. RE-VERIFIED 2026-09-28 (lane B, pipeline run 98). The Permit & Inspection Fees page (brla.gov/2694) and Chapter 9 Use Regulations were both fetched and read; all stored figures re-read verbatim, including the $125.00 residential trade permit, the $25.00 Technology Fee, the $25.00 Flood Zone Determination, the $75.00 reinspection fee, the $0.80 per square foot plus $125 residential accessory rate and the 5 percent credit card fee. No supersession.
Source: published fee schedule · Verified 11/12/2026
Water Heater Permit
These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.
○Residential Mechanical, Electrical or Plumbing, Gas Trade Permits Flat fee $125.00 | $125.00 |
○Commercial plumbing and/or gas permit, valuation up to $100,000 Flat fee $125.00 | $125.00 |
○Technology Fee Flat fee $25.00 | $25.00 |
○Reinspection Fees Flat fee $75.00 | $75.00 |
How this jurisdiction calculates the fee
Replacing a water heater in Baton Rouge requires a permit and is charged the flat residential plumbing and gas trade permit fee on the Permit and Inspection Fees page, plus the technology fee added to every permit. Section 8:801 of the Code of Ordinances sets the same flat amount for all other residential plumbing and gas work.
Source: published fee schedule · Verified 11/13/2026
See the full write-up: Baton Rouge building permit cost
Estimate only.Fee schedules change, and building departments set the final valuation and decide which fees apply to your scope. Confirm with the jurisdiction before budgeting. Lines marked “see rule” could not be computed from the published wording and are shown verbatim rather than guessed.