Buffalo, New York Building Permit Cost Calculator
Estimates permit cost in Buffalo from the city's own published fee schedule — not a national average. Every figure is computed from a rule quoted verbatim from that document, and rules that cannot be computed honestly are shown as the published text instead of a number.
217 jurisdictions with fee schedules on file
Total cost of work, labor and materials
Used by cities that price per square foot
Fences and retaining walls
Electrical permits priced by the ampere
Building Permit
These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.
○Application Fee (residential) Flat fee $25.00 | $25.00 |
Plan Review Fee, if work requires plans (includes M/E/P plan review fees) · add-on 20% of permit fee; $25 minimum — select the permit fee line above to calculate | see rule |
○New 1-family dwelling, 1,000 sq. ft. or less of floor area Flat fee $500.00 | $500.00 |
○New 1-family dwelling, 1,001 to 3,000 sq. ft. of floor area Flat fee $600.00 | $600.00 |
○New 1-family dwelling, 3,001 to 5,000 sq. ft. of floor area Flat fee $750.00 | $750.00 |
○New 1-family dwelling, 5,001 sq. ft. of floor area and over Flat fee $900.00 | $900.00 |
○New 2-family dwelling Flat fee $1,000.00 | $1,000.00 |
Townhouses $500 per unit | see rule |
○Additions, alterations, and repairs to residential structures, cost per $1,000 of construction cost $5.00 x 250 = $1,250.00 | $1,250.00 |
○Application Fee (commercial) Flat fee $50.00 | $50.00 |
○Commercial plan review, if work requires plans $0.75 x 250 = $187.50 | $187.50 |
○Commercial new construction, additions, change of use, or alterations $8.00 x 250 = $2,000.00 | $2,000.00 |
How this jurisdiction calculates the fee
Buffalo charges a flat application fee on every building permit, a plan review fee set at a share of the permit fee with a stated floor when the work needs plans, and a permit fee that depends on the work. Newly built houses on the residential schedule are priced by the floor area created, with separate brackets for single family homes, a single figure for a two family home, and a per unit figure for townhouses. Additions, alterations and repairs are priced per thousand dollars of construction cost with a stated minimum. Commercial permits derive a mean construction cost from the ICC Building Valuation Data table combined with city scope of work adjustment factors, then apply per thousand dollar rates for plan review and for the permit. Both schedules took effect July 1, 2025. | 2026-09-29 (lane B run 1809) CITATION GAP FOUND AND RECORDED. The cited Residential_Permit_Fees sheet (buffalonY.gov/DocumentCenter/View/15213) was re-read in full; it is a single page headed "RESIDENTIAL - DETACHED 1- & 2-FAMILY DWELLINGS", EFFECTIVE 7/1/2025, and every RESIDENTIAL figure this row carries re-reads verbatim on its own line. It does NOT contain the COMMERCIAL figures this row also carries. Those verify instead in a second, separate city sheet linked from buffalony.gov/721/Fee-Schedule as "Commercial Fees and Certificate of Compliance/Occupancy Fees": https://www.buffalony.gov/DocumentCenter/View/15216/Commercial_Permit_Fees, also EFFECTIVE 7/1/2025, where Application Fee $50, Plan Review Fee $0.75 per $1,000 of mean construction cost or portion thereof with a $75 minimum, New construction/additions/change of use/alterations $8 per $1,000 of cost with a $100 minimum, Fence requiring a permit $50, and Sheds & garages 600 square feet and under $100 all read verbatim. No figure changed and neither sheet is superseded; what was wrong was that a reader following fee_source_url would not have found the commercial amounts. Both sheets are named here so the next pass does not re-discover this.
Source: published fee schedule · Verified 9/29/2026
Deck Permit
These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.
○Additions, alterations, and repairs to residential structures, cost per $1,000 of construction cost (governing category; no deck-specific line is published) $5.00 x 250 = $1,250.00 | $1,250.00 |
○Application Fee (residential) Flat fee $25.00 | $25.00 |
Plan Review Fee, if work requires plans · add-on 20% of permit fee; $25 minimum — select the permit fee line above to calculate | see rule |
How this jurisdiction calculates the fee
Buffalo publishes no fee specific to decks. A deck is charged under the residential category for additions, alterations and repairs, priced per thousand dollars of construction cost with a stated minimum, on top of the flat application fee charged on every permit and a plan review fee if the work needs plans. The residential schedule took effect July 1, 2025.
Source: published fee schedule · Verified 9/30/2026
Electrical Permit
These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.
○Application fee Flat fee $50.00 | $50.00 |
○Any new electrical work at a 1-family dwelling or at 1 apartment of a two-family dwelling, including service, lights/receptacles, equipment, and low-voltage applications Flat fee $50.00 | $50.00 |
○Any new electrical work at both apartments of a 2-family residential dwelling, including service, lights/receptacles, equipment, and low-voltage applications Flat fee $75.00 | $75.00 |
○Meter releases for residential, commercial or industrial, first meter Flat fee $50.00 | $50.00 |
○Each electric meter to be installed (area-calculated) Flat fee $25.00 | $25.00 |
○Low-voltage applications for all systems installed by an individual contractor or installer, per system Flat fee $75.00 | $75.00 |
○Low-voltage applications, plus per termination for each system Flat fee $5.00 | $5.00 |
○Electrical site work not in conjunction with a building or structure project Flat fee $75.00 | $75.00 |
Area-calculated plan review (nonrefundable) $50.00 or $0.0025 x SF x use multiplier, whichever is greater | see rule |
Area-calculated permit and inspection $50.00 or $0.0275 x SF x use multiplier, whichever is greater | see rule |
How this jurisdiction calculates the fee
Electrical permit fees are divided into flat fees and area-calculated fees, as published by the Department of Permit & Inspection Services in its Electric Permit Types and Fees schedule. Flat fees apply only to work for which the Building Code of New York State requires no drawings or plans, and are not available for new construction projects or where plans are required; a $50 application fee is charged in addition to the flat permit fee. Where drawings or plans are required, fees are derived from Area-Calculated Fee Table Schedule A (a nonrefundable application charge, a nonrefundable plan review charge, and an inspection charge) and multiplied by the occupancy or use class multiplier in Schedule B, which is 0.5 for permanent 1- and 2-family use. Site-only work is charged the flat electrical site work fee.
Source: published fee schedule · Verified 9/29/2026
Fence Permit
These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.
○Fence requiring a permit (over height, etc.) - residential Flat fee $25.00 | $25.00 |
○Fence requiring a permit (over height, etc.) - commercial Flat fee $50.00 | $50.00 |
○Application Fee (residential) Flat fee $25.00 | $25.00 |
○Application Fee (commercial) Flat fee $50.00 | $50.00 |
How this jurisdiction calculates the fee
Buffalo charges a flat fee for a fence that needs a permit, listed among the residential flat fees, with a higher flat figure on the commercial schedule. The flat fee is added to the application fee charged on every permit. Both schedules took effect July 1, 2025. | 2026-09-29 (lane B run 1809) CITATION GAP FOUND AND RECORDED. The cited Residential_Permit_Fees sheet (buffalonY.gov/DocumentCenter/View/15213) was re-read in full; it is a single page headed "RESIDENTIAL - DETACHED 1- & 2-FAMILY DWELLINGS", EFFECTIVE 7/1/2025, and every RESIDENTIAL figure this row carries re-reads verbatim on its own line. It does NOT contain the COMMERCIAL figures this row also carries. Those verify instead in a second, separate city sheet linked from buffalony.gov/721/Fee-Schedule as "Commercial Fees and Certificate of Compliance/Occupancy Fees": https://www.buffalony.gov/DocumentCenter/View/15216/Commercial_Permit_Fees, also EFFECTIVE 7/1/2025, where Application Fee $50, Plan Review Fee $0.75 per $1,000 of mean construction cost or portion thereof with a $75 minimum, New construction/additions/change of use/alterations $8 per $1,000 of cost with a $100 minimum, Fence requiring a permit $50, and Sheds & garages 600 square feet and under $100 all read verbatim. No figure changed and neither sheet is superseded; what was wrong was that a reader following fee_source_url would not have found the commercial amounts. Both sheets are named here so the next pass does not re-discover this.
Source: published fee schedule · Verified 9/29/2026
Reroof Permit
These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.
○Additions, alterations, and repairs to residential structures, cost per $1,000 of construction cost (governing category; no roofing-specific line is published) $5.00 x 250 = $1,250.00 | $1,250.00 |
○Application Fee (residential) Flat fee $25.00 | $25.00 |
○Chimney work Flat fee $25.00 | $25.00 |
How this jurisdiction calculates the fee
Buffalo publishes no fee specific to roofing. Reroofing is charged under the residential category for additions, alterations and repairs, priced per thousand dollars of construction cost with a stated minimum, plus the flat application fee charged on every permit. The residential schedule took effect July 1, 2025.
Source: published fee schedule · Verified 9/30/2026
Retaining Wall Permit
These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.
○Additions, alterations, and repairs to residential structures, cost per $1,000 of construction cost (governing category; no retaining-wall line is published) $5.00 x 250 = $1,250.00 | $1,250.00 |
○Application Fee (residential) Flat fee $25.00 | $25.00 |
○Commercial new construction, additions, change of use, or alterations $8.00 x 250 = $2,000.00 | $2,000.00 |
How this jurisdiction calculates the fee
Buffalo publishes no fee specific to retaining walls. A retaining wall is charged under the residential category for additions, alterations and repairs, priced per thousand dollars of construction cost with a stated minimum, plus the flat application fee charged on every permit. On the commercial schedule, work on elements that are not part of the building is priced from the contract amount rather than from the valuation table. Both schedules took effect July 1, 2025. | 2026-09-30 (lane B run 1822) CITATION GAP REPAIRED, NO FIGURE CHANGED. The commercial line on this row ("$8 per $1,000 of cost; $100 minimum") is NOT in the cited Residential_Permit_Fees sheet (DocumentCenter/View/15213), which is headed "RESIDENTIAL - DETACHED 1- & 2-FAMILY DWELLINGS". It verifies verbatim in the separate Commercial_Permit_Fees sheet, https://www.buffalony.gov/DocumentCenter/View/15216/Commercial_Permit_Fees, 4 pages, every page footed EFFECTIVE 7/1/2025, which prints "New construction, additions, change of use, or alterations $8 per $1,000 of cost; $100". Both sheets are the operative citation for this row; same defect class run 1809 repaired on buffalo building, fence and shed. The residential figures re-read verbatim in 15213. NOTE: the source_url for this row, ecode360.com/13581203, could not be read this pass - it returns HTTP 403 to curl and serves a Cloudflare interactive challenge to headless Chromium, which this lane does not solve. That is a block, not a finding.
Source: published fee schedule · Verified 9/30/2026
Shed Permit
These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.
○Sheds and garages (over 144 square feet and under 600 square feet) - residential Flat fee $75.00 | $75.00 |
○Sheds & garages 600 square feet and under - commercial Flat fee $100.00 | $100.00 |
○Application Fee (residential) Flat fee $25.00 | $25.00 |
○Demolition of a detached accessory structure over 144 sq. ft. Flat fee $75.00 | $75.00 |
How this jurisdiction calculates the fee
Buffalo charges a flat fee for sheds and garages above 144 square feet and below 600 square feet, listed among the residential flat fees and added to the application fee charged on every permit. The published schedules leave a gap at exactly 600 square feet and above on the residential side, while the commercial schedule covers sheds and garages of 600 square feet and under at a higher flat figure. Demolition of a detached accessory structure above 144 square feet carries its own flat fee. Both schedules took effect July 1, 2025. | 2026-09-29 (lane B run 1809) CITATION GAP FOUND AND RECORDED. The cited Residential_Permit_Fees sheet (buffalonY.gov/DocumentCenter/View/15213) was re-read in full; it is a single page headed "RESIDENTIAL - DETACHED 1- & 2-FAMILY DWELLINGS", EFFECTIVE 7/1/2025, and every RESIDENTIAL figure this row carries re-reads verbatim on its own line. It does NOT contain the COMMERCIAL figures this row also carries. Those verify instead in a second, separate city sheet linked from buffalony.gov/721/Fee-Schedule as "Commercial Fees and Certificate of Compliance/Occupancy Fees": https://www.buffalony.gov/DocumentCenter/View/15216/Commercial_Permit_Fees, also EFFECTIVE 7/1/2025, where Application Fee $50, Plan Review Fee $0.75 per $1,000 of mean construction cost or portion thereof with a $75 minimum, New construction/additions/change of use/alterations $8 per $1,000 of cost with a $100 minimum, Fence requiring a permit $50, and Sheds & garages 600 square feet and under $100 all read verbatim. No figure changed and neither sheet is superseded; what was wrong was that a reader following fee_source_url would not have found the commercial amounts. Both sheets are named here so the next pass does not re-discover this.
Source: published fee schedule · Verified 9/29/2026
Water Heater Permit
These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.
○Application Fee (flat fee, required for all applications) Flat fee $50.00 | $50.00 |
○Plan Review Fee (only required if plans are required) Flat fee $100.00 | $100.00 |
○1- or 2-Family Residential Fixture Fee, per fixture (water heater is listed as a fixture) Flat fee $12.00 | $12.00 |
○Commercial / Other, first fixture Flat fee $50.00 | $50.00 |
○Commercial / Other, each additional fixture Flat fee $20.00 | $20.00 |
○Reinspection Fee, per reinspection Flat fee $75.00 | $75.00 |
How this jurisdiction calculates the fee
Buffalo treats a water heater as a plumbing fixture. Work at a one or two family dwelling is charged a flat amount per fixture, on top of a flat application fee required on every plumbing application. A plan review fee applies only when plans are required, and each reinspection is charged separately. Commercial and other work is charged a higher amount for the first fixture and a lower amount for each fixture after that. Applications must be completed and signed by a licensed master plumber. The plumbing fee page carries no stated effective date.
Source: published fee schedule · Verified 9/29/2026
See the full write-up: Buffalo building permit cost
Estimate only.Fee schedules change, and building departments set the final valuation and decide which fees apply to your scope. Confirm with the jurisdiction before budgeting. Lines marked “see rule” could not be computed from the published wording and are shown verbatim rather than guessed.