B
HomeLibrariesCode AISearchProjectsBookmarksAddress
FeedbackHelp Desk
Calculators
All Calculators
Permits
Permit Fee
Egress
Occupant Load & Egress
Structural
Beam SpanConcrete VolumeExcavationDeck Footings
Electrical
Electrical LoadWire Size
Mechanical
HVAC Load
Fire Safety
Fire Resistance
General
Stair Layout
Elsewhere
Code LibraryDiagramsAssembliesChecklistsNeed a custom calculation? →
PricingLog in
Home / Calculators / Building Permit Fee Calculator

Rochester, New York Building Permit Cost Calculator

Estimates permit cost in Rochester from the city's own published fee schedule — not a national average. Every figure is computed from a rule quoted verbatim from that document, and rules that cannot be computed honestly are shown as the published text instead of a number.

217 jurisdictions with fee schedules on file

Total cost of work, labor and materials

Used by cities that price per square foot

Fences and retaining walls

Electrical permits priced by the ampere

Building Permit

These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.

○Actual cost $0 to $2,000
Flat fee $75.00
$75.00
○Actual cost $10,001 to $12,000
Flat fee $235.00
$235.00
○Actual cost $30,001 to $32,000
Flat fee $550.00
$550.00
○Actual cost $58,001 to $60,000
Flat fee $985.00
$985.00
Actual cost $60,001 to $100,000
$235 plus .014 x actual cost
see rule
Actual cost $100,001 to $500,000
$590 plus .011 x actual cost
see rule
How this jurisdiction calculates the fee

The fee is based on the actual cost of the work under Municipal Code section 39-221, using a stepped schedule that runs from $75 for work costing up to $2,000 to $985 at $60,000, with a base fee plus a percentage of actual cost above $60,000; actual cost must be supported by a signed contract or detailed cost estimate, and current RS Means square-foot costs are used if none is available or the estimate is in question. | 2026-09-25 (lane B run 1754) RE-VERIFIED VERBATIM. Municipal Code s. 39-221 still carries "[Last amended 6-16-2026 by Ord. No. 2026-191]", the same amendment recorded in run 1728; no newer ordinance. Note ecode360.com 403s curl and was rendered with headless Chromium.

Source: published fee schedule · Verified 9/25/2026

Deck Permit

These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.

○Deck, < = 144 square feet
Flat fee $75.00
$75.00
○Deck, > = 144 square feet
Flat fee $160.00
$160.00
○Deck, > = 400 square feet
Flat fee $235.00
$235.00
How this jurisdiction calculates the fee

The Municipal Code fee schedule in section 39-221F sets flat building permit fees for decks by deck area. | 2026-09-24 (lane B run 1728) VERIFIED, SECTION RECENTLY AMENDED, NO FIGURE CHANGED. Rochester City Code s. 39-221 Fees for permits now carries the banner "[Last amended 6-16-2026 by Ord. No. 2026-191]". Every stored figure was re-read verbatim under that amended text.

Source: published fee schedule · Verified 9/24/2026

Electrical Permit

These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.

Residential, new dwelling unit with service
$275 + $120 per each additional unit
see rule
○Renovation/addition, less than or equal to 200 square feet
Flat fee $160.00
$160.00
○Renovation/addition, greater than 200 and up to 1,000 square feet
Flat fee $200.00
$200.00
○Renovation/addition, greater than 1,000 square feet
Flat fee $235.00
$235.00
New service installation or upgrade less than or equal to 200 amps each
$160 + $55 per each additional meter
see rule
New service installation or upgrade greater than 200 amps each
$220 + $55 per each additional meter
see rule
○Pool/hot tub wiring
Flat fee $100.00
$100.00
○Reinspection fee
Flat fee $100.00
$100.00
How this jurisdiction calculates the fee

Electrical fees are flat rates by type of work under Municipal Code section 39-221F, with residential renovation and addition fees tiered by area; the dwelling unit and renovation/addition fees do not include service installation.

Source: published fee schedule · Verified 9/25/2026

Fence Permit

These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.

○Actual cost $0 to $2,000
Flat fee $75.00
$75.00
○Actual cost $2,001 to $4,000
Flat fee $110.00
$110.00
○Actual cost $4,001 to $6,000
Flat fee $145.00
$145.00
How this jurisdiction calculates the fee

Building permit fees are based on the actual cost of the work under Municipal Code section 39-221, using a stepped schedule.

Source: published fee schedule · Verified 9/25/2026

Retaining Wall Permit

These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.

○Actual cost $0 to $2,000
Flat fee $75.00
$75.00
○Actual cost $2,001 to $4,000
Flat fee $110.00
$110.00
○Actual cost $4,001 to $6,000
Flat fee $145.00
$145.00
How this jurisdiction calculates the fee

Building permit fees are based on the actual cost of the work under Municipal Code section 39-221, using a stepped schedule. | 2026-09-24 (lane B run 1728) VERIFIED, SECTION RECENTLY AMENDED, NO FIGURE CHANGED. Rochester City Code s. 39-221 Fees for permits now carries the banner "[Last amended 6-16-2026 by Ord. No. 2026-191]". Every stored figure was re-read verbatim under that amended text.

Source: published fee schedule · Verified 9/24/2026

Shed Permit

These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.

○Actual cost $0 to $2,000
Flat fee $75.00
$75.00
○Actual cost $2,001 to $4,000
Flat fee $110.00
$110.00
How this jurisdiction calculates the fee

Building permit fees are based on the actual cost of the work under Municipal Code section 39-221, using a stepped schedule.

Source: published fee schedule · Verified 9/25/2026

Water Heater Permit

These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.

○Base fee for all plumbing permits
Flat fee $100.00
$100.00
○Fixtures: installation, removal or capping, residential (3 units or less), each
Flat fee $20.00
$20.00
○Reinspection or callback when work is not ready for inspection, each
Flat fee $100.00
$100.00
How this jurisdiction calculates the fee

Every plumbing permit carries a base fee, with itemized charges added by type of work under Municipal Code section 39-221F. | 2026-09-24 (lane B run 1728) VERIFIED, SECTION RECENTLY AMENDED, NO FIGURE CHANGED. Rochester City Code s. 39-221 Fees for permits now carries the banner "[Last amended 6-16-2026 by Ord. No. 2026-191]". Every stored figure was re-read verbatim under that amended text.

Source: published fee schedule · Verified 9/24/2026

See the full write-up: Rochester building permit cost

Estimate only.Fee schedules change, and building departments set the final valuation and decide which fees apply to your scope. Confirm with the jurisdiction before budgeting. Lines marked “see rule” could not be computed from the published wording and are shown verbatim rather than guessed.