B
HomeLibrariesCode AISearchProjectsBookmarksAddress
FeedbackHelp Desk
Calculators
All Calculators
Permits
Permit Fee
Egress
Occupant Load & Egress
Structural
Beam SpanConcrete VolumeExcavationDeck Footings
Electrical
Electrical LoadWire Size
Mechanical
HVAC Load
Fire Safety
Fire Resistance
General
Stair Layout
Elsewhere
Code LibraryDiagramsAssembliesChecklistsNeed a custom calculation? →
PricingLog in
Home / Calculators / Building Permit Fee Calculator

Philadelphia, Pennsylvania Building Permit Cost Calculator

Estimates permit cost in Philadelphia from the city's own published fee schedule — not a national average. Every figure is computed from a rule quoted verbatim from that document, and rules that cannot be computed honestly are shown as the published text instead of a number.

217 jurisdictions with fee schedules on file

Total cost of work, labor and materials

Used by cities that price per square foot

Fences and retaining walls

Electrical permits priced by the ampere

Building Permit

These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.

○New construction, residential one-or-two family
Flat fee $1,328.00
$1,328.00
New construction, other occupancies
$253 for the first 500 sq. ft.; plus $73 for each additional 100 sq. ft. or fraction thereof above 500
see rule
New accessory structures or additions, residential one-or-two family
$75 for the first 500 sq. ft.; plus $56 for each additional 100 sq. ft. or fraction thereof above 500
see rule
Alterations, residential one-or-two family
$76 for the first 500 sq. ft.; plus $56 for each additional 100 sq. ft. over 500
see rule
Alterations, other occupancies
$253 for the first 500 sq. ft.; plus $60 for each additional 100 sq. ft. over 500
see rule
Foundation only
$253 (area up to 500 sq. ft.); $442 (area between 501 to 2,500 sq. ft.); $759 (area exceeding 2,500 sq. ft.)
see rule
○General demolition
$0.25 x 2,000 = $506.00
$506.00
Site preparation (earth movement)
$126 for areas up to 15,000 sq. ft.; $6.30 for each additional 1,000 sq. ft. over 15,000 sq. ft. (maximum $6,325)
see rule
Certificate of occupancy
No Additional Fee (as part of the Building Permit Process)
see rule
Preliminary review
$442 (three stories or less); $94 (each additional story above three)
see rule
Items not listed · add-on
2% of construction value, (minimum $158) — select the permit fee line above to calculate
see rule
How this jurisdiction calculates the fee

Building permit fees are charged by project category, with one set of rates for one-or-two-family residential work and another for all other occupancies, and area-based categories are priced on a base amount for an initial area plus an increment for each additional increment of area.

Source: published fee schedule · Verified 9/18/2026

Deck Permit

These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.

○Porch or deck flooring (maximum 200 sq. ft.), residential one-or-two family
Flat fee $63.00
$63.00
○Porch or deck flooring (maximum 200 sq. ft.), other occupancies
Flat fee $69.00
$69.00
New accessory structures or additions, residential one-or-two family
$75 for the first 500 sq. ft.; plus $56 for each additional 100 sq. ft. or fraction thereof above 500
see rule
New accessory structures or additions, other occupancies
$253 for the first 500 sq. ft.; plus $73 for each additional 100 sq. ft. or fraction thereof above 500
see rule
How this jurisdiction calculates the fee

Replacing porch or deck flooring up to 200 square feet is charged as a minor alteration at a flat rate, and building a new deck is charged under the new accessory structures or additions category based on floor area.

Source: published fee schedule · Verified 9/18/2026

Electrical Permit

These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.

○Filing fee
Flat fee $100.00
$100.00
Permit fee
$25 for each $1000 or fraction thereof of estimated electrical construction cost
see rule
○Minimum permit fee
Flat fee $63.00
$63.00
○Maximum permit fee
Flat fee $18,975.00
$18,975.00
○City surcharge
Flat fee $3.00
$3.00
○State surcharge
Flat fee $4.50
$4.50
○Rough-in permit (optional)
Flat fee $150.00
$150.00
○Accelerated plan review (optional)
Flat fee $1,050.00
$1,050.00
○Record retention fee, per plan
Flat fee $4.00
$4.00
How this jurisdiction calculates the fee

A nonrefundable filing fee is due with the application and is counted toward the final permit fee, and the permit fee is charged per increment of estimated electrical construction cost, subject to a minimum and a maximum.

Source: published fee schedule · Verified 10/22/2026

Fence Permit

These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.

○Filing fee, lots containing one-or-two-family dwellings
Flat fee $25.00
$25.00
○Filing fee, fencing on all other sites
Flat fee $100.00
$100.00
○Zoning permit fee, lots containing one-or-two-family dwellings
Flat fee $50.00
$50.00
○Zoning permit fee, all other lots 30,000 sq. ft. or less
Flat fee $253.00
$253.00
○Zoning permit fee, all other lots over 30,000 sq. ft.
Flat fee $632.00
$632.00
○Building permit fee, each fence
Flat fee $139.00
$139.00
○Building permit fee, flat fee for one-or-two-family dwellings
Flat fee $69.00
$69.00
○City surcharge
Flat fee $3.00
$3.00
○State surcharge
Flat fee $4.50
$4.50
○Accelerated plan review (optional)
Flat fee $2,000.00
$2,000.00
○Record retention fee
Flat fee $4.00
$4.00
How this jurisdiction calculates the fee

A nonrefundable filing fee is due with the application, and separate zoning and building permit fees apply based on the site and the number of fences. LABEL IMPRECISION NOTED 2026-09-18 (lane B run 1482), no amount affected: every figure on this row re-verified verbatim on the cited phila.gov permit page today, but the line stored as "Record retention fee = $4.00" is printed by the City as a per-document charge, worded "Per page larger than 8.5 in. x 14 in.: $4" on the retaining-wall and fence permit pages and "Per plan: $4" on the plumbing permit page. The $4.00 is correct; the label drops the qualifier.

Source: published fee schedule · Verified 11/10/2026

Reroof Permit

These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.

○Roof covering (replacement only), residential one-or-two family
Flat fee $69.00
$69.00
Roof covering (replacement only), other occupancies
$76 for the first 4,000 sq. ft.; $3.80 for each additional 100 sq. ft. above 4,000
see rule
How this jurisdiction calculates the fee

Replacing a roof covering is charged as a minor alteration, at a flat rate for one-or-two-family residential buildings and by roof area for all other occupancies.

Source: published fee schedule · Verified 9/18/2026

Retaining Wall Permit

These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.

○Filing fee, sites containing one-or-two-family dwellings
Flat fee $25.00
$25.00
○Filing fee, all other sites
Flat fee $100.00
$100.00
○Walls between 2 ft. and 4 ft. tall
Flat fee $158.00
$158.00
○Walls 4 ft. and taller
Flat fee $253.00
$253.00
○Flat fee for one-or-two-family dwellings
Flat fee $69.00
$69.00
○City surcharge
Flat fee $3.00
$3.00
○State surcharge
Flat fee $4.50
$4.50
○Accelerated plan review (optional)
Flat fee $2,000.00
$2,000.00
○Record retention fee
Flat fee $4.00
$4.00
How this jurisdiction calculates the fee

A nonrefundable filing fee is due with the application and is applied toward the final permit fee, and the permit fee is based on the height of the retaining wall. LABEL IMPRECISION NOTED 2026-09-18 (lane B run 1482), no amount affected: every figure on this row re-verified verbatim on the cited phila.gov permit page today, but the line stored as "Record retention fee = $4.00" is printed by the City as a per-document charge, worded "Per page larger than 8.5 in. x 14 in.: $4" on the retaining-wall and fence permit pages and "Per plan: $4" on the plumbing permit page. The $4.00 is correct; the label drops the qualifier.

Source: published fee schedule · Verified 11/10/2026

Shed Permit

These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.

New accessory structures or additions, residential one-or-two family
$75 for the first 500 sq. ft.; plus $56 for each additional 100 sq. ft. or fraction thereof above 500
see rule
New accessory structures or additions, other occupancies
$253 for the first 500 sq. ft.; plus $73 for each additional 100 sq. ft. or fraction thereof above 500
see rule
How this jurisdiction calculates the fee

A shed that requires a permit is charged under the new accessory structures or additions category, based on floor area, with separate rates for one-or-two-family residential sites and all other occupancies.

Source: published fee schedule · Verified 9/18/2026

Water Heater Permit

These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.

○Filing fee
Flat fee $100.00
$100.00
○Water heater
Flat fee $37.00
$37.00
○Water heater, one-or-two-family homes
Flat fee $31.00
$31.00
○City surcharge
Flat fee $3.00
$3.00
○State surcharge
Flat fee $4.50
$4.50
○Rough-in permit (optional)
Flat fee $150.00
$150.00
○Record retention fee
Flat fee $4.00
$4.00
How this jurisdiction calculates the fee

A nonrefundable filing fee is due with the application and is applied toward the final permit fee, and the water heater permit fee is a flat amount that is lower for one-or-two-family homes. LABEL IMPRECISION NOTED 2026-09-18 (lane B run 1482), no amount affected: every figure on this row re-verified verbatim on the cited phila.gov permit page today, but the line stored as "Record retention fee = $4.00" is printed by the City as a per-document charge, worded "Per page larger than 8.5 in. x 14 in.: $4" on the retaining-wall and fence permit pages and "Per plan: $4" on the plumbing permit page. The $4.00 is correct; the label drops the qualifier.

Source: published fee schedule · Verified 9/18/2026

See the full write-up: Philadelphia building permit cost

Estimate only.Fee schedules change, and building departments set the final valuation and decide which fees apply to your scope. Confirm with the jurisdiction before budgeting. Lines marked “see rule” could not be computed from the published wording and are shown verbatim rather than guessed.