B
HomeLibrariesCode AISearchProjectsBookmarksAddress
FeedbackHelp Desk
Calculators
All Calculators
Permits
Permit Fee
Egress
Occupant Load & Egress
Structural
Beam SpanConcrete VolumeExcavationDeck Footings
Electrical
Electrical LoadWire Size
Mechanical
HVAC Load
Fire Safety
Fire Resistance
General
Stair Layout
Elsewhere
Code LibraryDiagramsAssembliesChecklistsNeed a custom calculation? →
PricingLog in
Home / Calculators / Building Permit Fee Calculator

Springfield, Massachusetts Building Permit Cost Calculator

Estimates permit cost in Springfield from the city's own published fee schedule — not a national average. Every figure is computed from a rule quoted verbatim from that document, and rules that cannot be computed honestly are shown as the published text instead of a number.

217 jurisdictions with fee schedules on file

Total cost of work, labor and materials

Used by cities that price per square foot

Fences and retaining walls

Electrical permits priced by the ampere

Deck Permit

These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.

○Roofing, siding, decks, insulation and windows/doors (City Ordinance 112.08.110(F))
Flat fee $75.00
$75.00
How this jurisdiction calculates the fee

The Building Department permit fee schedule, effective July 16, 2012, lists decks in a combined category of exterior work on the building.

Source: published fee schedule · Verified 11/6/2026

Electrical Permit

These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.

○100 amp or 200 amp electrical service
Flat fee $80.00
$80.00
○400 amp electrical service
Flat fee $120.00
$120.00
○800 amp electrical service
Flat fee $240.00
$240.00
Residential new construction, additions and alterations with a building permit
$110.00 per dwelling unit
see rule
Residential work where no building permit is required, minimum fee
$50.00 plus $10.00 per room
see rule
○Residential alarm systems
Flat fee $80.00
$80.00
○Accessory work items such as major appliances, oil or gas burners, above-ground or in-ground pools
Flat fee $80.00
$80.00
Alternate power sources such as solar or generators, residential
$.03 per watt, $80.00 minimum
see rule
Permit re-issuance
$80.00, or the original permit fee if less than $80.00
see rule
How this jurisdiction calculates the fee

Section 12.08.130 of the electrical wiring fee schedule, effective July 1, 2012, prices electrical services at $.30 per amp with an $80.00 minimum and sets flat or per-unit fees for other work; the fees in Sections B through I exclude the cost of service.

Source: published fee schedule · Verified 9/15/2026

Reroof Permit

These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.

○Roofing, siding, decks, insulation and windows/doors (City Ordinance 112.08.110(F))
Flat fee $75.00
$75.00
Roofing of a commercial building, new construction and existing or repairs (City Ordinance 12.08.30(D))
$80.00 minimum plus $.05 per square foot
see rule
How this jurisdiction calculates the fee

The Building Department permit fee schedule, effective July 16, 2012, lists roofing fees by building type.

Source: published fee schedule · Verified 11/9/2026

Retaining Wall Permit

These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.

Temporary structure building permit and retaining walls (City Ordinance 12.08.050(A))
$80.00 minimum
see rule
How this jurisdiction calculates the fee

The Building Department permit fee schedule, effective July 16, 2012, lists retaining walls together with temporary structure building permits under City Ordinance 12.08.050(A).

Source: published fee schedule · Verified 11/9/2026

Shed Permit

These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.

Sheds over 200 SF (MA Amendments)
$50.00 minimum
see rule
How this jurisdiction calculates the fee

The Building Department permit fee schedule, effective July 16, 2012, lists a fee for sheds over 200 square feet, referencing the Massachusetts amendments to the state building code.

Source: published fee schedule · Verified 11/9/2026

Water Heater Permit

These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.

Water heater, residential
$80.00 flat fee
see rule
Water heater, non-residential
$110.00 flat fee
see rule
Re-inspection of unsatisfactory work
$80.00 flat fee
see rule
How this jurisdiction calculates the fee

Section 12.08.120 of the plumbing and gas fee schedule, effective July 1, 2012, sets flat water heater fees in subsection (E) and a re-inspection fee for unsatisfactory work in subsection (G).

Source: published fee schedule · Verified 9/15/2026

See the full write-up: Springfield building permit cost

Estimate only.Fee schedules change, and building departments set the final valuation and decide which fees apply to your scope. Confirm with the jurisdiction before budgeting. Lines marked “see rule” could not be computed from the published wording and are shown verbatim rather than guessed.