B
HomeLibrariesCode AISearchProjectsBookmarksAddress
FeedbackHelp Desk
Calculators
All Calculators
Permits
Permit Fee
Egress
Occupant Load & Egress
Structural
Beam SpanConcrete VolumeExcavationDeck Footings
Electrical
Electrical LoadWire Size
Mechanical
HVAC Load
Fire Safety
Fire Resistance
General
Stair Layout
Elsewhere
Code LibraryDiagramsAssembliesChecklistsNeed a custom calculation? →
PricingLog in
Home / Calculators / Building Permit Fee Calculator

Cincinnati, Ohio Building Permit Cost Calculator

Estimates permit cost in Cincinnati from the city's own published fee schedule — not a national average. Every figure is computed from a rule quoted verbatim from that document, and rules that cannot be computed honestly are shown as the published text instead of a number.

217 jurisdictions with fee schedules on file

Total cost of work, labor and materials

Used by cities that price per square foot

Fences and retaining walls

Electrical permits priced by the ampere

Building Permit

These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.

○Project valuation $2,000.00 - permit without plans
Flat fee $106.00
$106.00
○Project valuation $2,000.00 - RCO project with plans
Flat fee $173.00
$173.00
○Project valuation $2,000.00 - OBC project with plans
Flat fee $336.00
$336.00
○Project valuation $10,000.00 - all three columns
Flat fee $336.00
$336.00
○Project valuation $25,000.00 - all three columns
Flat fee $655.00
$655.00
○Project valuation $50,000.00 - all three columns
Flat fee $1,065.00
$1,065.00
For all valuations over $50,000
$1065 + $11.59 x (VALUATION/$1,000)
see rule
○Permit processing fee - RCO applications
Flat fee $49.00
$49.00
○Permit processing fee - OBC applications
Flat fee $133.00
$133.00
○Re-inspection fee, per inspection following second failed inspection
Flat fee $169.00
$169.00
State surcharge on RCO permits
1%
see rule
State surcharge on OBC permits
3%
see rule
Technology surcharge on all scheduled fees excluding Administrative Hearings fees
3%
see rule
Financial Recovery Fee on all scheduled fees excluding Administrative Hearings fees
1%
see rule
Training surcharge on all scheduled fees excluding Administrative Hearings fees
1%
see rule
Planning surcharge on all Construction, Plumbing and HVAC permits
5%
see rule
How this jurisdiction calculates the fee

Cincinnati prices building permits from project valuation using a single table with three columns: permits issued without plans, projects reviewed under the Residential Code of Ohio, and projects reviewed under the Ohio Building Code. Valuation is rounded up to the nearest increment and rests on the estimated value of improvements together with published construction cost data. Above fifty thousand dollars the fee follows a stated formula. A one time nonrefundable processing fee is charged at application, at different amounts for residential and commercial work, and every scheduled fee carries percentage surcharges for state, technology, financial recovery, training and planning purposes. The schedule took effect July 1, 2026. UNRESOLVED READ 2026-09-11 (run 744, WebFetch-only, curl egress refused): two WebFetch reads of the cited FY2027 schedule returned mutually inconsistent valuation-table figures and neither matched this row. Read one reported a $68.00 minimum for RCO projects without plans at $2,000; read two, asked for column headers first, returned headers that merged two columns ("Estimated Valuation | Permits without plans RCO Project with plans* | OBC Project with plans | OBC Projects without plans and new RCO installations | OBC Projects with plans" - four headers for five columns) and row values of $102/$345/$68/$97 at $2,000, $249 at $5,000, $450 at $10,000, $955 at $25,000 and $1,639 at $50,000, against the stored $106/$173/$336, $203, $336, $655 and $1,065. Decisive evidence this is a column-misalignment artifact and not a fee change: the same fetch returned the over-$50,000 formula as "$1065 + $11.59 x (VALUATION/$1,000)", whose $1,065 anchor IS the stored $50,000 figure that the same read reported as $1,639, and returned the RCO and OBC processing fees as $49.00 and $133.00, matching this row exactly. The document edition is confirmed unchanged (effective July 01, 2026) and the retaining-wall valuation rule re-read clean at $466/lnft and $314/lnft. NOTHING CHANGED; row deliberately left unstamped so the rotation returns it. Needs one curl + pdftotext -layout read to settle. CORROBORATED 2026-09-11 (run 757, WebFetch-only, curl egress refused for the fifth consecutive pass): a THIRD independent read reproduced read two's figures exactly ($249 at $5,000, $450 at $10,000, $955 at $25,000), so the misalignment is deterministic and reproducible rather than random noise, and repeating the read is therefore worthless - it will keep returning the same wrong column. It also again claimed a column count inconsistent with the headers it listed (stated "7 columns", listed 5). NEW AND INDEPENDENT PROOF OF ROW-LEVEL BLEED, from the plumbing table on the same page: asked for the fixture table, the fetch returned 1 fixture as "$108.00 | $238.00" but 2 fixtures as "$101.00 | $130.00", which matches the stored water_heater row EXACTLY - one row wrong and the row beneath it right, inside a single three-column table. The $68/$97 pair that read one reported as a valuation-table minimum is in fact the stored 1-fixture replace/new plumbing pair, i.e. the reader is importing cells across tables. Together with the $1,065 anchor argument above this is now conclusive that the stored figures are correct and unchanged. All prose-level content re-confirmed verbatim this pass: effective July 01, 2026; 3% technology and 5% planning surcharges; RCO $49.00 and OBC $133.00 processing fees; Zoning Certificate of Compliance $151.00; retaining wall $466/lnft above 5 feet and $314/lnft below. Six Cincinnati rows again left unstamped. ESCALATION: this is the third consecutive pass blocked on the same single curl + pdftotext -layout read; it needs egress restored or a human decision, not another WebFetch attempt.

Source: published fee schedule · Verified 11/12/2026

Deck Permit

These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.

○Project valuation $2,000.00 - permit without plans (governing table; no deck-specific line is published)
Flat fee $106.00
$106.00
○Project valuation $5,000.00 - permit without plans
Flat fee $203.00
$203.00
○Project valuation $10,000.00 - permit without plans
Flat fee $336.00
$336.00
○Permit processing fee - RCO applications
Flat fee $49.00
$49.00
Planning surcharge on all Construction, Plumbing and HVAC permits
5%
see rule
How this jurisdiction calculates the fee

Cincinnati publishes no fee specific to decks. A deck is charged from project valuation using the building permit table, which covers new construction, additions, alterations and repairs, plus the one time processing fee charged at application and the percentage surcharges added to every scheduled fee. The schedule took effect July 1, 2026.

Source: published fee schedule · Verified 11/13/2026

Electrical Permit

These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.

How this jurisdiction calculates the fee

Cincinnati does not issue electrical permits and publishes no electrical permit fee. Electrical permitting, plan review and inspection are contracted out to a private firm, Inspection Bureau, Inc., which accepts applications and plans directly at its own office while staying integrated with the city electronic permit system. Any charge for an electrical permit is set by that firm rather than by the city fee schedule, so there is no municipal amount to report.

Source: published fee schedule · Verified 8/7/2026

Fence Permit

These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.

○Certificate of Compliance or Certificate of Appropriateness
Flat fee $158.55
$158.55
How this jurisdiction calculates the fee

The fee for a building permit is based on the value of the construction as well as an application fee and a processing fee, determined by Building Department staff at the time of submission; the Zoning Certificate of Compliance and the Certificate of Appropriateness each carry the same set fee.

Source: published fee schedule · Verified 11/10/2026

Reroof Permit

These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.

○Project valuation $10,000.00 - permit without plans (governing table; no roofing-specific line is published)
Flat fee $336.00
$336.00
○Project valuation $25,000.00 - permit without plans
Flat fee $655.00
$655.00
○Permit processing fee - RCO applications
Flat fee $49.00
$49.00
Planning surcharge on all Construction, Plumbing and HVAC permits
5%
see rule
How this jurisdiction calculates the fee

Cincinnati publishes no fee specific to roofing. Reroofing is charged from project valuation using the building permit table, which covers new construction, additions, alterations and repairs, plus the one time processing fee charged at application and the percentage surcharges added to every scheduled fee. The schedule took effect July 1, 2026.

Source: published fee schedule · Verified 11/12/2026

Retaining Wall Permit

These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.

Valuation rule: portions of walls greater than 5 feet in height above grade
$466/lnft
see rule
Valuation rule: portions of walls less than 5 feet in height above grade
$314/lnft
see rule
○Resulting project valuation $10,000.00 - permit without plans
Flat fee $336.00
$336.00
○Resulting project valuation $25,000.00 - permit without plans
Flat fee $655.00
$655.00
○Permit processing fee - RCO applications
Flat fee $49.00
$49.00
○Permit processing fee - OBC applications
Flat fee $133.00
$133.00
How this jurisdiction calculates the fee

Retaining walls are named in the heading of the Cincinnati building permit fee table, so the fee is read from that table and turns on project valuation. The schedule fixes that valuation itself rather than leaving it to the applicant: the part of a wall standing more than five feet above grade is valued at a stated amount per linear foot, and the part standing less than five feet above grade at a lower amount per linear foot. The resulting valuation is rounded up to the nearest increment and read against the table, after which the processing fee and the percentage surcharges are added. The schedule took effect July 1, 2026.

Source: published fee schedule · Verified 11/13/2026

Shed Permit

These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.

○Project valuation $2,000.00 - permit without plans (governing table; no shed-specific line is published)
Flat fee $106.00
$106.00
○Project valuation $5,000.00 - permit without plans
Flat fee $203.00
$203.00
○Zoning Certificate of Compliance
Flat fee $151.00
$151.00
○Permit processing fee - RCO applications
Flat fee $49.00
$49.00
How this jurisdiction calculates the fee

Cincinnati publishes no fee specific to sheds. A shed is charged from project valuation using the building permit table, which covers new construction, additions, alterations and repairs, plus the one time processing fee charged at application and the percentage surcharges added to every scheduled fee. A zoning certificate of compliance carries its own flat fee where one is needed. The schedule took effect July 1, 2026.

Source: published fee schedule · Verified 11/12/2026

Water Heater Permit

These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.

○1 fixture - replace fixture fee (a water heater swap)
Flat fee $68.00
$68.00
○1 fixture - new fixture fee
Flat fee $97.00
$97.00
○2 fixtures - replace fixture fee
Flat fee $101.00
$101.00
○2 fixtures - new fixture fee
Flat fee $130.00
$130.00
○Each additional fixture beyond 50
Flat fee $33.00
$33.00
Planning surcharge on all Construction, Plumbing and HVAC permits
5%
see rule
Technology surcharge on all scheduled fees
3%
see rule
How this jurisdiction calculates the fee

Cincinnati charges plumbing permits by counting fixtures, using one column for replacing a fixture and a higher column for a new fixture. Swapping a water heater counts as a single replaced fixture. Each fixture past the fiftieth adds a flat amount. The one time application processing fee does not apply to plumbing repair or replacement work that needs no plans, but the percentage surcharges still apply, including the planning surcharge charged on plumbing permits. The schedule took effect July 1, 2026.

Source: published fee schedule · Verified 11/13/2026

See the full write-up: Cincinnati building permit cost

Estimate only.Fee schedules change, and building departments set the final valuation and decide which fees apply to your scope. Confirm with the jurisdiction before budgeting. Lines marked “see rule” could not be computed from the published wording and are shown verbatim rather than guessed.