Home / Products / Div 06 17 33 — 06 17 33 / PWT Treated LVL

Pacific Woodtech Corporation (PWT)Div 06 · Wood, Plastics, CompositesNo manufacturer photo on file

Div 06 17 33 · 06 17 33

PWT Treated LVL

Pacific Woodtech Corporation (PWT) · PWT Treated LVL, 2.0E 2800 Fb, TRU-CORE treated, dry use

*** THIS ROW IS THE INVERSE OF THE RUN 732 MASS PLY LAM CASE AND THE PAIR IS WORTH KEEPING SIDE BY SIDE. THERE, THE MANUFACTURER NAMED THE STANDARD THE CODE SECTION REQUIRES AND DID NOT USE THE SUBJECT TERM. HERE, PWT ESTABLISHES THE SUBJECT TERM PLAINLY - its own LVL page calls the product "a structural composite product" made of bonded parallel-grain veneers, which is what IBC 2303.1.10 means by structural composite lumber - AND NAMES NO STANDARD: ASTM D5456 APPEARS NOWHERE ON THE RETRIEVED PAGES OR IN THE RETRIEVED TECH GUIDE. Call it a REQUIREMENT GAP, against the run 732 subject-term gap. The link below is made on the subject and is explicitly marked as not resting on the standard. *** WHAT PWT DOES PUBLISH IS BETTER THAN MOST: THREE EVALUATION REPORT NUMBERS (ICC-ES ESR-2909, ESR-3834, APA PR-L329) AND A FLORIDA PRODUCT APPROVAL (FL 39762). NONE OF THOSE DOCUMENTS WAS RETRIEVED - they live on icc-es.org, apawood.org and floridabuilding.org, all OFF the manufacturer host - SO NOTHING INSIDE THEM IS ASSERTED HERE. They are recorded as numbers PWT publishes, which is exactly what the run 732 Freres row could not do (there an APA report number surfaced in an off-host search result and was deliberately NOT filed because the manufacturer had not published it). HERE THE MANUFACTURER PUBLISHES THE NUMBERS ITSELF, ON ITS OWN DOCUMENT, WHICH IS WHY THEY ARE FILED. THE DISTINCTION IS THE WHOLE PROVENANCE RULE IN ONE PAIR OF ROWS. *** THE SISTER PRODUCT WAS EXAMINED AND NOT LISTED: the untreated PWT LVL page (https://pwtewp.com/products/lvl) NAMES NO STANDARD, NO REPORT NUMBER, NO GRADE AND NO DESIGN VALUE - it refers grades and dimensions to a downloadable quick guide that was not retrieved. No row was created for it and NONE OF THIS ROW EVIDENCE IS BORROWED ONTO IT: treated and untreated LVL are different products with different reports.

✓ Verified 2026-09-11

Specs on this page were checked against PWT Treated LVL User Guide (Dry Use), retrieved 2026-09-11 from pwtewp.com/wp-content/uploads/ - the manufacturer own domain and own literature, on a host whose robots.txt is User-agent: * / Allow: / with no Disallow of any kind and no Crawl-delay, read live the same run. The treated-lvl and lvl product pages on the same host were retrieved in the same run; the treated-lvl page is recorded as product_url. NOTE: pacificwoodtech.com 302-redirects to this host and the redirect was resolved rather than followed blind - robots was read on the destination. on 2026-09-11.

View on manufacturer site →Spec Sheet (PDF)

Certifications & Standards

ICC Evaluation Service *** PUBLISHED BY THE MANUFACTURER ON ITS OWN TECHNICAL GUIDE, WHICH IS WHY THEY ARE FILED - CONTRAST RUN 732, where an APA report number for Freres MPP surfaced only in an OFF-HOST search result and was refused. NEITHER REPORT WAS RETRIEVED: ICC-ES reports live on icc-es.org, off the manufacturer host, and NOTHING INSIDE THEM IS ASSERTED - not their scope, not their design values, not their edition, and not whether either remains current. An ESR is the ordinary route by which a proprietary wood product earns code recognition, so these two numbers are the most valuable thing on this target, AND THEY ARE FILED AS NUMBERS THE MANUFACTURER PUBLISHES, NOT AS EVIDENCE WE HAVE CHECKED. Letter 150 asks which report covers which product and which edition is current. ***

APA - The Engineered Wood Association Published by PWT on the same guide. NOT RETRIEVED, contents not asserted. Note for the corpus: run 732 recorded APA PR-L325 for Freres Mass Ply Panel as an off-host number it REFUSED to file. PR-L329 here is filed because the manufacturer published it. THE TWO REPORT NUMBERS ARE FOUR APART AND THE TREATMENT OF THEM IS OPPOSITE, ENTIRELY BECAUSE OF WHERE THEY WERE FOUND.

Florida Building Commission (product approval) Published by PWT. NOT RETRIEVED. The Florida product approval system is NOT held in this corpus - as with the Miami-Dade NOA in run 736, a Florida approval number currently attaches to nothing here. FOR LANE B: Florida product approvals came up twice in one session, on unrelated targets.

AWPA (American Wood Protection Association) - use category cited, standard designation NOT published PWT states the treatment is suited to UC3B exterior above-ground use. THE AWPA STANDARD NUMBER (U1, and the commodity specification) IS NOT PUBLISHED and is not supplied by us - the run 718/730 named-body-no-number shape, in its use-category form. No AWPA standard is held in this corpus in any case.

NONE - a manufacturer statement about treatment chemistry and warranty Recorded as PWT states it. A WARRANTY IS A COMMERCIAL INSTRUMENT, NOT A RATING, and the non-corrosive and no-added-VOC claims name no test standard, so none of this links to anything. Filed because a specifier comparing treated LVL products will look for exactly these lines.

Sustainability

No sustainability metrics on file for this product.