846.1 General Description
This section includes the requirements for Polyvinyl Chloride (PVC) Drain Pipe.
846.1.01 Related References
A. Standard Specifications Section 106–Control of Materials B. Referenced Documents AASHTO M 304 ASTM F 477 ASTM F 949 ASTM D 3212 QPL 51 SOP-28
846.2 Materials
846.2.01 Polyvinyl Chloride (PVC) Profile Wall Drain Pipe
A. Requirements Use pipe that meets the requirements of AASHTO M 304. Ensure pipe is produced from an approved source listed on QPL 51. Ensure joints are watertight and have elastomeric seals that meet the requirements of ASTM F 477. Assemble the joints according to the manufacturer’s recommendations. B. Fabrication General Provisions 101 through 150. C. Acceptance The Department will test and inspect using SOP-28. Have the manufacturer test the joint tightness according to ASTM D 3212 and certify the results according to Subsection 106.05. D. Materials Warranty General Provisions 101 through 150.
846.2.02 Polyvinyl Chloride (PVC) Corrugated Smooth Interior Drain Pipe
A. Requirements Use pipe that meets the requirements of ASTM F 949. Ensure pipe is produced from an approved source listed on QPL 51. Ensure joints are watertight and have elastomeric seals that meet the requirements of ASTM F 477. Assemble the joints according to the manufacturer’s recommendations. B. Fabrication General Provisions 101 through 150. C. Acceptance The Department will test and inspect using SOP-28. Have the manufacturer test the joint tightness according to ASTM D 3212 and certify the results according to Subsection 106.05. D. Materials Warranty General Provisions 101 through 150.
Get an email when 846 changes
Georgia revises spec sections through supplementals and new editions. We check this one every week and email you the day it changes. Free, no account.