1614 - CAST STEEL PRODUCTS 1600-24
1614.1 Description
This specification governs products fo r various applications cast from steel.
1614.2 Requirements
a. General. Provide castings that comply with the design, dimensions, and specific fabrication requirements as specified in the Co ntract Documents. Provide the products in the as-cast and as-machined condition. b. Material Specifications. The steel castings provided through this specification are to comply with ASTM A 27. Unless specified otherwis e, annealed Grade 65-35 is required with the Class as specified on the Contract Documents. Comply with ASTM A 27 for all weld joining or repair of these castings.
1614.3 Test Methods
Conduct all tests required by the applicable ASTM specifications of subsection 1614.2b.
1614.4 Prequalification
Not applicable.
1614.5 Basis of Acceptance
Receipt and approval of a Type D certification as specified in DIVISION 2600. The KDOT reserves the right to request and test specimens from delivered casting lots to verify specification compliance. Specimens may be cast test bars from the manufacturer or sections removed from castings if test bars are not available, or there is reason to suspect their validity. The final disposition of all castings will be completed at the final destination as the result of inspection for the quality of workmanship and the delivery condition.
Get an email when 1614 changes
Kansas revises spec sections through supplementals and new editions. We check this one every week and email you the day it changes. Free, no account.