1733– GEOMEMBRANE 1700-51
1733.1 Description
This specification covers the requirements for geomembrane installed as an impermeable barrier.
1733.2 Materials
Provide either a polypropylene geomembrane or a polyethylene geomembrane that has the minimum, minimum average roll values (MARV) shown in TABLE 1733-1. TABLE 1733-1: GEOMEMBRANE MINIMUM AVERAGE ROLL VALUES Type of Geomembrane: Property Test Method Requirement Polypropylene: Thickness 30 mils Puncture Resistance ASTM D 4833 40 lbs. Tensile Strength ASTM D 638 78 lbs./in. Polyethylene: Thickness 30 mils Tensile Yield Strength ASTM D 638 78 lbs./in. Puncture Resistance FTMS 101C, Method 2065 45 lbs. Tear Resistance ASTM D 1004 24 lbs. Provide cushioning material (sand) that comp lies with the requirements of FA-A or FA-B, DIVISION 1100.
1733.3 Test Methods
Test in accordance with the requirements stated in subsection 1733.2.
1733.4 Prequalification
None required.
1733.5 Basis of Acceptance
Receipt and approval of a Type D certification as specified in DIVISION 2600.
Geomembrane in other states
Get an email when 1733 changes
Kansas revises spec sections through supplementals and new editions. We check this one every week and email you the day it changes. Free, no account.