203 - RESETTING EXISTING CULVERTS 200-6
203.1 Description
Remove and reset the existing culverts and end s ections as specified in the Contract Documents. BID ITEMS UNITS Resetting End Section Each Resetting Pipe Culvert Linear Foot
203.2 Materials
Provide the required materials that comply with SECTIONS 1000 – 2500.
203.3 Construction Requirements
Remove the designated structures without damaging. Store and protect the structure from damage, if the structure is not reset immediately. Replace, in kind, any structures or materials damaged or lost. Clean all structures before resetting. Reset the structures at the locati ons shown in the Contract Documents. Excavate for, place and backfill the structures according to SECTION 204.
203.4 Measurement and Payment
The Engineer will measure each removal a nd resetting of an existing end section. The Engineer will measure the removal and resetting of an existing pipe culvert by the linear foot of culvert reset. Payment for "Resetting End Section" and "Resetting Pipe Culvert" at the contract unit prices is full compensation for the specified work. If, upon removal, the Engineer determines that the existing culvert or end section is damaged, and the damage is not a result of the Contractor’s actions, the E ngineer will pay for the replacem ent of the culvert or end section as Extra Work, SECTION 104.
Get an email when 203 changes
Kansas revises spec sections through supplementals and new editions. We check this one every week and email you the day it changes. Free, no account.