B
HomeLibrariesCode AISearchProjectsBookmarksAddress
FeedbackHelp Desk
Libraries
Estimate & calculate
CalculatorsChecklists
PricingLog in
Division 2200 — Reflective Materials and Accessory Items

2210Temporary Pavement Marking Tape

KS · 2015 Standard Specifications✓ Full text on BuildSpecBook pages 918–918 Save this section

Ask about Section 2210

Get a cited answer from the section text. Click the citation to check it.

One cited answer a day is free. Start a 14-day trial for unlimited, no card required.

2210 - TEMPORARY PAVEMENT MARKING TAPE 2200-14

2210.1 Description

This specification covers preformed plastic pavement markings designed for limited service life. This includes both Removable (Type I) and Non-removable (Type II) materials for use on bot h portland cement concrete and asphalt surfaces. Type I tape can be removed without damage to or discoloration of the pavement surf ace. Type II is not required to have the removal characteristics of Type I, though removal that leaves damage to or discoloration of the pavement surface may be required, as shown in the Contract Documents. This specification also covers Removable Line Mask ing Tape. This is a highly durable, skid resistant, non-reflective, black or dark gray, pliant polymer tape designed for temporary obliteration of existing pavement markings. The tape must be able to be removed without residue or damage to the existing marking.

2210.2 Requirements

Provide pavement markings that comply with ASTM D 4592 with the following exceptions and additions:  Delete all references to application temperatures. Apply all markings according to the manufacturer's recommendations for proper surf ace conditions and preparation, ai r and surface temperatures, and other weather conditions.  Store all material in accordance with the manufacturer's directions, including temperature and exposure to the elements.  If recommended by the manufacturer, use a primer to precondition the pavement surface.  Visibility. Pavement Marking Tape shall be visible a minimum of 300 feet in daytime and nighttime conditions. Retroreflectivity measured under field conditions may be used to determine visibility.  Retroreflectivity. Retroreflectivity requirements are not applicable for Removable Line Masking Tape. Provide tape in white or yellow which complies with the minimum requirements shown in TABLE 2210-1: TABLE 2210-1: RETROREFLECTIVITY Color Millicandelas/sq m/lux (min.) White 250 Yellow 175

2210.3 Test Methods

ASTM D 4592

2210.4 Prequalification

None Required.

2210.5 Basis of Acceptance

Receipt and approval of a Type D certification as specified in DIVISION 2600. Visual observation of performance on the project.

Temporary Pavement Marking Tape in other states

Get an email when 2210 changes

Kansas revises spec sections through supplementals and new editions. We check this one every week and email you the day it changes. Free, no account.

Source: Standard Specifications for State Road and Bridge Construction, 2015 Edition. Pages 918–918 of 978. View official source ↗

Ask about this section

Scoped to Kansas KDOT Standard Specifications for Road & Bridge Construction, Section 2210 — Temporary Pavement Marking Tape. Every answer cites the section it came from, with a verification date — don’t trust a percentage, click the citation.