B
HomeLibrariesCode AISearchProjectsBookmarksAddress
FeedbackHelp Desk
Libraries
Estimate & calculate
CalculatorsChecklists
PricingLog in
Category 400 — Structures

461Metal Railing

MD · 2026 Standard Specifications✓ Full text on BuildSpecBook pages 582–583 Save this section

Ask about Section 461

Get a cited answer from the section text. Click the citation to check it.

One cited answer a day is free. Start a 14-day trial for unlimited, no card required.

461 — METAL RAILING 2026 STANDARD SPECIFICATIONS FOR CONSTRUCTION AND MATERIALS CATEGORY 400 STRUCTURES SECTION 461 — METAL RAILING

461.01 Description

Furnish, fabricate, coat, and install metal or polyester coated steel railings.

461.02 Materials

Refer to Contract Documents. Square Structural Tubing for Rail Elements 909, A500, Grade B, or A618 or A501 Steel Posts and Plates 909, A36 Anchor bolts 909.08 Fusion Bonded Polyester Powder Coating 917.03, Color shall match AMS-STD- 595A, Color No. 20040 or as specified Hot Dip Galvanized Zinc A123, A153 Galvanizing Repair 465.03.05(c)

461.02.01 Structural Steel. Grind all welds of the railing system smooth, and remove all weld

spatter. Ensure that all components are free of oil and any mill coating, burrs, pits, rust, or other foreign matter or surface blemishes. Galvanize all structural steel including fasteners and anchor bolts. Oversize the threads of the nuts according to A563. When specified, after fabrication and galvanizing, coat all structural steel for the railing with the polyester coating system as specified in 465.03.01 and 465.03.02, except as noted. Completely fabricate each component of the railing system including drilling of all holes prior to galvanizing and/or applying the polyester coating system.

461.02.02 Bolts, Nuts, and Washers. When specified, coat bolts, nuts, and washers with the

polyester coating system. Tap the nuts with oversize threads according to A563. The coating manufacturer shall ensure that the polyester coated bolts, nuts, and washers fit together without damaging their respective coatings. 461 — METAL RAILING 2026 STANDARD SPECIFICATIONS FOR CONSTRUCTION AND MATERIALS

461.02.03 Anchor Bolts and Assemblies. When the polyester coating is specified, the coating

manufacturer shall ensure that the polyester coated nuts and washers for attaching the bridge railing to the structure fit together without damaging their respective coatings. Do not polyester coat (only galvanize) portions of anchor bolts and assemblies to be embedded in concrete.

461.03 Construction

Fabricate and install all railings according to the Contract Documents to the horizontal and vertical alignment of the structure. Posts shall be normal to grade. Furnish working drawings for approval.

461.03.01 Production, handling and Shipment. All components shall be wrapped to ensure safe

arrival at the project site. Handle carefully metal railings and incidental parts and store them on blocking, racks, or platforms to elevate them at least 4 in. above the ground and surrounding surfaces. The material shall be protected from corrosion or damage, and shall be kept free from dirt, oil, grease, and other foreign matter. Wrapping shall remain until the component is to be incorporated into the work. Repair or replace damaged material as directed.

461.03.02 Anchor Bolts. Ensure that galvanized anchor bolt threads are free of all dirt, grease,

oil, or other deleterious substances prior to roughening with a wire brush or other approved method prior to installation of the railing. Submit the proposed procedures prior to installation of the railing. After the installation of the railing, touch up the exposed portions of the anchor bolt threads and any portions of the nuts, washers, or railing components as specified in 465.03.05. Perform the work according to the manufacturer’s recommendations. When the Engineer determines that a damaged area is beyond repair, remove, discard, and replace it at no additional cost.

461.04 Measurement and Payment

The payment will be full compensation for all material, labor, equipment, tools and incidentals necessary to complete the work.

461.04.01 Metal Railing will be measured and paid for at the Contract unit price per linear foot.

461.04.02 Metal Railing will not be measured but will be paid for at the Contract lump sum price.

461.04.03 Metal railing for which no specific item is included will not be measured but the cost

will be incidental to other pertinent items.

Get an email when 461 changes

Maryland revises spec sections through supplementals and new editions. We check this one every week and email you the day it changes. Free, no account.

Source: Standard Specifications for Construction and Materials, 2026 Edition. Pages 582–583 of 1,138. View official source ↗

Ask about this section

Scoped to Maryland Standard Specifications for Construction and Materials, Section 461 — Metal Railing. Every answer cites the section it came from, with a verification date — don’t trust a percentage, click the citation.