Maryland Department of Transportation — State Highway Administration (MDOT SHA) · Standard Specifications for Construction and Materials
Section 479 — Pressure Injected Epoxy Crack Repair
Maryland Standard Specifications for Construction and Materials, Section 479. Full text, cross-references and related pay items on BuildSpec.
479 — PRESSURE INJECTED EPOXY CRACK REPAIR 2026 STANDARD SPECIFICATIONS FOR CONSTRUCTION AND MATERIALS CATEGORY 400 STRUCTURES SECTION 479 — PRESSURE INJECTED EPOXY CRACK REPAIR 479.01 DESCRIPTION Inject epoxy in cracks with a maximum width of 1/4 in. 479.02 MATERIALS The epoxy resin shall conform to 921.04, C 881, Type I. Submit the grade for approval after the Contractor’s analysis of the areas to be injected. The system shall be moisture insensitive and shall not be used when the ambient or concrete temperature is 50 F or below, nor temperatures lower than recommended by the manufacturer.…
The rest of Section 479 — Pressure Injected Epoxy Crack Repair is for members
You're reading the opening of Section 479 — Pressure Injected Epoxy Crack Repair. Members see the complete text, every cross-reference and the tools on this page — free for 14 days, no card required.
- Complete section text with subsections and tables
- Search across every state DOT standard specification
- Prior editions and related products
- Ask Copilot about this section, with citations