Section 867
8-49 Payment will be made under:
Pay I tem Pay Unit Woven Wire Fence, __" Fabric Linear Foot Chain Link Fence, __" Fabric Linear Foot ____ Strand Barbed Wire Fence with Posts Linear Foot __" Timber Fence Posts, __' Long Each Metal Line Posts for __" Chain Link Fence Each Metal Terminal Posts for __" Chain Link Fence Each Metal Gate Posts for __" Chain Link Fence, Double Gate Each Metal Gate Posts for __" Chain Link Fence, Single Gate Each Double Gates, __ High, __ Wide, __ Opening Each Single Gates, __ High, __ Wide, __ Opening Each Additional Barbed Wire Linear Foot SECTION 867 FENCE RESET
867-1 Description
Remove and reset existing fences of various types to the locations indicated i n the plans or where directed by the Engineer .
867-2 Construction Methods
Reset the fence in a condition that is equal to or better than before the fence is removed. Replace any of the fence components unnecessarily damaged by the Contractor’s forces. Fill any void created by fence removal. The Contractor will be responsible for damage caused by livestock escaping or entering the existing fenced area through the negligence of his forces . If the owner of the fence desires to repair, rebuild or renew any parts of the fence and agrees to furnish the materials without cost to the Contractor, then repair, rebuild, renew and reset such fence using the material furnished by the owner at no addi tional cost to the owner or the Department.
867-3 Measurement and Payment
____ Fence Reset will be measured and paid in the linear feet of fence that has been acceptably reset. Measurement will be made along the fence after it has been reset from center of end post to center of end post. Such price includes , but is not limited to , removing, hauling and re - erecting the existing fence; and furnishing and installing any fence com ponents unnecessarily damaged by the Contractor's forces. Payment will be made under: Pay Item Pay Unit ____ Fence Reset Linear Foot
869-1 Description
Relap either existing or recently installed guardrail in accordance with t he contract and where directed by the Engineer .