806GROUT AND EPOXY

ND · 2022 Standard Specifications✓ Full text on BuildSpecBook pages 447–447 Save this section

Ask about Section 806

Get a cited answer from the section text. Click the citation to check it.

One cited answer a day is free. Start a 14-day trial for unlimited, no card required.

412 SECTION 806

806.01 Rapid -Hardening Cementitious Materials

Use material that meets the requirements of ASTM C 928, Type R1.

806.02 Epoxy Resin Adhesives

Use material that meets the requirements of AASHTO M 235, Type IV, Grade 3. Select the appropriate Class of adhesive based on the surface temperature of the concrete the adhesive will be applied to. Section 808 413 SECTION 808 CONCRETE ADMIXTURES

808.01 Air -Entraining Admixtures

Use air -entraining admixtures that meet the requirements of AASHTO M 154.

808.02 Chemical Admixtures

Chemical admixtures may be used, but must meet the requirements of AASHTO M 194 and be classified as Type A under ASTM C 494. Other types of admixtures may be used, but must be approved by the Engineer before use.

Referenced in this section

808CONCRETE ADMIXTURES

Sections that cite this one

Get an email when 806 changes

North Dakota revises spec sections through supplementals and new editions. We check this one every week and email you the day it changes. Free, no account.

Source: North Dakota Standard Specifications for Road and Bridge Construction, 2022 Edition. Pages 447–447 of 550. View official source ↗

← Previous

804 CEMENT AND LIME

808 CONCRETE ADMIXTURES

Ask about this section

Scoped to North Dakota Standard Specifications for Road & Bridge Construction, Section 806 — GROUT AND EPOXY. Every answer cites the section it came from, with a verification date — don’t trust a percentage, click the citation.