660-3 01
NEW YORK STATE DEPARTMENT OF TRANSPORTATION Section 600 STANDARD SPECIFICATIONS (USC) January 1, 202 4 VOLUME 3
660-3.01 General. The installation and testing procedures shall conform to the requirements specified by
the utility company.
660-3.02 Schedule of Work. Work shall be scheduled for minimum interruption of service and must
meet the approval of the utility company and the Engineer. A specified, advance notice, period must be given to the utility company and Engineer prior to interruption of services for con struction.
660-3.03 Excavation. The requirements specified in Section 206, Trench, Culvert and Structure
Excavation, shall apply.
660-3.04 Backfilling. The requirements specified in Section 203, Select Granular Fill , shall apply.
660-4 METHOD OF MEASUREMENT. As specified in the special specifications.
660-5 BASIS OF PAYMENT. As specified in the special specifications.
SECTION 661 - ELECTRIC UTILITIES
661-1 DESCRIPTION. The work in this section shall include special construction required for electric
service utilities that are publicly, privately or cooperatively owned. The extent of work and construction specifications will be covered by special provisions in the cont ract documents.
661-2 MATERIALS. Materials shall meet the requirements specified by the respective electric utility
company.
661-3 Construction Details
661-3.01 General. The installation and testing procedures shall conform to the requirements specified
by the electric utility company.
661-3.02 Schedule of Work. Work shall be scheduled for minimum interruption of service and must
meet the approval of the utility company and the Engineer. A specified advance notice period must be given to the utility company and Engineer prior to interruption of services for co nstruction.
661-3.03 Excavation. The requirements specified in Section 206, Trench, Culvert and Structure
Excavation, shall apply.
661-3.04 Backfill. The requirements specified in Section 203, Select Granular Fill , shall apply.
661-4 METHOD OF MEASUREMENT. As specified in the special specifications.
661-5 BASIS OF PAYMENT. As specified in the special specifications.
SECTION 662 - GAS, OIL & STEAM UTILITIES
662-1 DESCRIPTION. The work in this section shall include special construction required for gas, oil
and steam service utilities that are publicly, privately or cooperatively owned. The extent of work and construction specifications will be covered by special provisions i n the contract documents. NEW YORK STATE DEPARTMENT OF TRANSPORTATION Section 600 STANDARD SPECIFICATIONS (USC) January 1, 202 4 VOLUME 3 662-2 MATERIALS. Materials shall meet the requirements specified by the respective utility company.
662-3 Construction Details
662-3.01 General. The installation and testing procedures shall conform to the requirements specified
by the utility company.
662-3.02 Schedule of Work. Work shall be scheduled for minimum interruption of service and must
meet the approval of the utility company and the Engineer. A specified, advance notice period must be given to the utility company and Engineer prior to interruption of services for co nstruction.
662-3.03 Excavation. The requirements specified in Section 206, Trench, Culvert and Structure
Excavation, shall apply.
662-3.04 Backfill. The requirements specified in Section 203, Select Granular Fill , shall apply.
662-4 METHOD OF MEASUREMENT. As specified in the special specifications.
662-5 BASIS OF PAYMENT. As specified in the special specifications.
SECTION 663 - WATER SUPPLY UTILITIES
663-1 DESCRIPTION. This work shall consist of the construction or reconstruction of water supply
utilities in accordance with these specifications, the contract documents and the standard sheets.
663-2 Materials
663-2.01 General. Materials requirements are specified in the following subsections:
Portland Cement Concrete 501 Reinforced Concrete Pipe Classes II, III, IV, V 706-02 Prefabricated Adjustment Rings, Frames and Utility Valve Risers for Drainage Units, Manholes and Utilities 715-13 High Strength Bolts, Nuts and Washers 715-14 Pins and Rollers 715-15 Stainless Steel Connecting Products 715-16 Ductile Iron Water Pipe, Fittings and Encasement 722-01 Steel Water Pipe and Fittings 722-02 Concrete Water Pipe 722-03 Water Valves and Hydrants 722-04 Plastic Water Pipe and Fittings 722-05 Water Service Pipe, Service Valves and Fittings 722-06 Wedge Type Mechanical Restraint Glands 722-07 Insulation for Water Mains 722-08 Steel Pipe ASTM A53 Materials for water systems shall meet the appropriate American Water Works Association (AWWA) standards and American National Standards Institute (ANSI) specifications, except as modified by these specifications. Asbestos cement pipe or lead tipped gaske ts shall not be used. The materials provided shall meet the requirements specified in the “Owner Requirements for Water Mains and Appurtenances”.