00599.00 680 Section 00599 - Concrete Slope Paving Description
00599.00 Scope - This Work consists of constructing concrete slope paving on bridge end slopes as
shown, specified, or directed. Materials
00599.10 Materials - Furnish Material s meeting the following requirements:
Commercial Grade Concrete ...................................................................... 00440 Grout ..................................................................................................... 02080.40 Reinforcement ............................................................................................ 02510 Construction
00599.40 Slope Preparation - Grade the slopes for slope and berm paving, and curbs to the lines
and grades established. Finish the area to a smooth, firm, compacted condition. Dispose of excess materials according to 00330.41(a)(4). If slopes constructed under a separate contract require additional Materials to prepare slopes to the established lines and grades, furnish such M aterials according to 00140.30.
00599.42 Slope Paving - Pave slopes with precast or cast -in-place blocks as the Contractor elects.
Give the tops of blocks a wood float and brush finish parallel with the long dimension of the block.
a.Precast Blocks - Manufacture precast blocks according to the Plans and Section 00440.
b.Cast -in-place Blocks - Place concrete for cast -in-place blocks according to Section 00440. 00599. 43 Berm Paving - Construct berm paving according to the Plans and Section 00440, except finish the berm paving to a neat, smooth surface.
00599.44 Slope Paving Curbs - Construct slope paving curbs according to the Plans and to
Section 00440 and Section 02510. Measurement
00599.80 Measurement - The quantities of Work performed under this Section will be measured
according to the following:
a.Slope Paving - Concrete slope paving will be measured on the area basis, on the slope paving surface for each bridge end slope.
b.Berm Paving - Berm paving will be measured on the area basis, on the berm paving surface for each berm.
c.Slope Paving Curbs - Slope paving curbs will be measured on the length basis. 00599.90 681 Payment
00599.90 Payment - The accepted quantities of Work performed under this Section will be paid for
at the Contract unit price, per unit of measurement, for the following items: Pay Item Unit of Measurement
a.Concrete Slope Paving ................................................................... Square Foot
b.Berm Paving ................................................................................... Square Foot
c.Slope Paving Curbs .............................................................................. Foot Payment will be payment in full for furnishing and placing all Material s, and for furnishing all Equipment , labor, and Incidental s necessary to complete the Work as specified. Payment for furnishing additional embankment Material s required for slope preparation constructed under a separate contract will be made according to 00195.20. 00599.90 Blank Page
Concrete Slope Paving in other states
Get an email when 00599 changes
Oregon revises spec sections through supplementals and new editions. We check this one every week and email you the day it changes. Free, no account.
Source: Oregon Standard Specifications for Construction, 2024 Edition. Pages 746–748 of 1,268. View official source ↗