00815.90 857 Section 00815 - Bollards
Description
00815.00Scope - This Work consists of furnishing and installing bollards at locations shown or as
directed.
Materials
00815.10Materials - Furnish Materials meeting the following requirements:
Granular Drain Backfill .......................................................................... 00430.11 Reflective Sheeting (Type III and Type IV) .......................................... From QPL
00815.11Posts and Sleeves - Use Schedule 40 steel pipe for the posts and either Schedule 40 or
Schedule 80 steel pipe for the sleeves , as shown. Use st eel pipe conforming to ASTM A53, Type E, Grade A.
00815.12Plates, Shapes, Fasteners, and Hardware - Use plates and shapes conforming to
ASTM A36. Use fasteners and hardware conforming to ASTM A449.
00815.13Galvanizing - Hot-dip galvanize all metal components after fabrication according to
AASHTO M 111 ( ASTM A123) or AASHTO M 232 ( ASTM A153), as applicable.
00815.14PVC Pipe - Use Schedule 40 PVC pipe
00815.15Painting Bollards - Paint the exposed portion of designated bollards with one coat of the
type and color of coating, as shown or specified.
Construction
00815.40Bollards - Install bollards as shown or as directed
Measurement
00815.80Measurement - The quantities of bollards will be measured on a unit basis
Payment
00815.90Payment - The accepted quantities of bollards will be paid for at the Contract unit price,
per unit of measurement, for the following items:
Pay Item Unit of Measurement
Payment will be payment in full for furnishing and placing all Materials, and for furnishing all Equipment , labor, and Incidentals necessary to complete the Work as specified.
No separate or additional payment will be made for excavation, backfill, or painting.