00905.90 895 PART 00900 - PERMANENT TRAFFIC CONTROL AND ILLUMINATION SYSTEMS
Description
00905.00Scope - This Work consists of one or both of the following:
• Removing existing signs, specific service signs, and tourist -oriented directional signs (TODS) as shown or directed. • Removing and moving existing signs, specific service signs, and tourist -oriented directional signs (TODS) from their existing locations and reinstalling them at new locations as shown or direc ted.
Construction
00905.40General - Do not remove signs from existing supports until new supports are in place,
ready to receive the signs. Install the signs on the new supports immediately after removing from existing supports. Provide temporary supports as required. Provide permanent supports according to Sections 00910, 00920, and 00930 as required. Protect specific service signs (business logos) and TODS from damage, whether the signs are to remain in place or are placed on temporary supports, until reinstalled on permanent supports. Repair or replace damaged signs at no additional cost to the Agency. Liquidated damages will be assessed against the Contractor in the amount of $200 per Day for each sign out of service for more than 5 Calendar D ays.
Install rigid, temporary vertical ties to the back of all extruded aluminum panel signs to prevent buckling of the sign panels or their legends during removal, moving and reinstallation of the signs. Repair any damage inflicted to the signs or their legends.
Remove to 1 foot below the ground line those installations with concrete or steel footings set in the ground unless indicated otherwise. Fill the resultant hole and finish the surface to correspond with the surrounding area. Do not remove the existing appurtenances until ordered. Dispose of all existing appurtenances removed and not used in reinstallation, according to 00290.20.
Measurement
00905.80Measurement - No measurement of quantities will be made for Work performed under this
Secti on.
Payment
00905.90Payment - The accepted quantities of Work performed under this Section will be paid for
at the Contract unit price, per unit of measurement, for the following items:
Pay Item Unit of Measurement
Payment will be payment in full for furnishing and placing all Materials, and for furnishing all Equipment , labor, and Incidentals necessary to complete the Work as specified.