00941.00 922 Section 00941 - Sign Covers Description
00941.00 Scope - This Work consists of covering sign faces as shown, specified, or directed.
Materials
00941.10 Materials - For permanent signs, furnish sign covers from the QPL or porous cloth covers
pre-approved by the sign sheeting manufacturer. Do not use plywood. For temporary signs comply with Section 00222 . Construction
00941.40 Fabrication - Fabricate sign covers in one piece, unless otherwis e directed. Make them
large enough to completely cover the sign, and capable of easy attachment to the sign without damaging the sign face.
00941.41 Installation - Lap covers over all sign edges and secure to the sign or support as
recommended by the s ign sheeting manufacturer.
00941.42 Alternate - The Contractor may elect one or more of the following as alternate methods
subject to approval: • Install signs in conjunction with the movement of the traffic flow. • Remove demountable legend from signs and re-install legend as directed. • Remove entire sign and store in a vertical position for future reinstallation. Measurement
00941.80 Measurement - No measurement will be made for sign covers.
Payment
00941.90 Payment - No separate or additional payment will be made for sign covers or for the
alternate methods listed in 00941.42. Payment will be included in payment made for the appropriate items under which this Work is required.
Get an email when 00941 changes
Oregon revises spec sections through supplementals and new editions. We check this one every week and email you the day it changes. Free, no account.