02210.00 1078 Coatings
Description
02210.00Scope - This Section includes the requirements for coating Materials used on timber and
concrete.
Materials
02210.10General :
• All coats in the coating system shall be from the same manufacturer. • Multi -component coating M aterials shall be proportioned by the manufacturer with each component in its correct proportion and furnished in separate c ontainers ready for field mixing. • Be homogeneous, free of contamination, and of a consistency suitable for the specified use. • Not vary in composition without prior notice by the manufacturer and approval of the Engineer. • The coating Material is not reformulated.
Use the coating M aterial before expiration of the manufacturer's recommended shelf life.
• Be new steel or plastic of not more than 6 gallon capacity. • Meet U.S. Department of Transportation's Hazardous Material Shipping Regulations. • Be original and unopened. • Be labeled with the following: • Manufacturer's name • Exact title of coating M aterial • Manufacturer's batch number • Date of manufacture
02210.20Coating Materials for Timber - Furnish coatings for timber from the QPL under the
category "Timber Coatings".
02210.21Sealer for Timber - Furnish clear sealers for timber from the QPL under the category
"Timber Sealers".
02210.30Coating M aterials for Concrete - Furnish coatings for concrete from the QPL under the
category "Latex Emulsion Paint".