Article 1 — Description
Excavate, remove, use, or dispose of materials using a bulldozer. Construct, shape, and finish earthwork in conformance with the required lines, grades, and typical cross -sections as shown on the plans, or as directed.
Article 2 — Equipment
Use a tractor, crawler, or rubber- tired type equipment with a blade attachment at least 8 ft. long. Use a scarifier or ripper with the required tractor when necessary. Use equipment of the type specified on the plans, in conformance with the following requirements .
2.1 Type A . Manufacturer’s rated net flywheel power of less than 150 horsepower based on Society of
Automotive Engineers (SAE) standard J1349.
2.2 Type B . Manufacturer’s rated net flywheel power of 150 or greater horsepower based on SAE standard
J1349.
Article 3 — Construction
Perform bulldozer work on the areas as specified on the plans, using equipment as specified above. Rough- in with bulldozer work where plans designate “Bulldozer Work” and “Blading,” or “Road Grader Work,” within the same limits. Finish in conformance with specifications for “Blading” or “Road Grader Work.” Compact embankment to ordinary compaction in accordance with Item 132, “Embankment,” unless otherwise shown on the plans.
Article 4 — Measurement
This Item will be measured by the actual number of hours of use of the specified type of equipment operated.
Article 5 — Payment
The work performed and materials furnished in accordance with this Item and measured as provided under “Measurement” will be paid for at the unit price bid for “Bulldozer Work.” This price is full compensation for furnishing and operating equipment, labor, materials, tools, and incidentals. “Sprinkling” and “Rolling” will not be measured or paid for directly but will be subsidiary to this Item. Work performed under this Item will not include work specified for payment under other Items.